1986 528e Rust Free,Sheet Metal Available, FINAL CALL 5/2/16

Buy, sell, or trade parts.
Post Reply
white chocolate
Posts: 428
Joined: Sep 21, 2011 9:44 PM
Location: Canton, Ohio

1986 528e Rust Free,Sheet Metal Available, FINAL CALL 5/2/16

Post by white chocolate »

Greetings!

EDIT: MAKE ME OFFERS, I WONT BE OFFENDED!!!

I have made my money back on the car and whatever is left will be getting cut up and scrapped within the next week or two. I would rather someone benefit from the car than get rid of it all, so if you see something you like, contact me and we can work something out.

Looking to help some people out and hopefully not scrap a perfectly rust free E28. I would love to sell EVERYTHING to someone who can come load it up and get use out of the car and parts. I will sell the entire rolling shell with all parts for $275.00.

I would also be willing to cut the car up. If you need floor pans, quarters, rear section, front end parts, whatever you like. This would be a last ditch effort before scrapping the car, so if you are interested, contact me and we can work out the details.

Several people have contacted me wanting specific sheet metal pieces cut off the car, so anything you fancy yourself is up for grabs.


Sold units are:
Hood
Front bumper and trim
Left Fender
valance
Tail lights
Radiator
Rear bumper trim.
Turn Signal stalk
Gas Tank
Left Rear Bumper Support
Four Lift Points/ Floor Pans
Front Suspension
Rear Sub frame
Right Side Quarter
Wheels
All Four Lift Points/ sections of floors and wheel wells
Upper left rear section of left rear quarter ( where the trunk seal goes)


-I am keeping the rear bumper and the, a/c compressor and high/ low pressure a/c lines, and blower motors.

-I do not know if any of these items work, but I would imagine they do. I bought the car in pieces and have no way of testing them. Some of the larger pieces still available include:

Both Front Doors $50 each. Completely loaded minus door panels. Tweeters, door handles, locks, all wiring, hardware, mirrors, glass

Both Rear Doors $40 each. Complete. Door latches, handles, tinted glass

Rear differential (293). $50

Rear deck lid $25

Rear windshield (dark tint) $25

Sunroof. $50

Complete HVAC box. $25

Steering box. $25.

Headlights. $20

Engine block & crank. $40. (M20, Unknown condition, use at your own risk)

Wiper linkage. $20

4hp auto trans $40 (unknown condition, will need to verify trans type)

ECU. $10

ABS Module. $20

-BUYER PAYS ALL SHIPPING. I'm willing to ship as long as you allow time for me to get the parts off the car and in the mail. Shipping will vary per part size and weight. I appreciate your patience with shipping and will ship parts as quickly as I can. I do not know the working condition of any electrical parts. I bought the car in pieces and have no way to know if any of it is good or in working order. Buy at your own risk!

-If there is something you don't see listed, please ask. I will gladly get you detailed pictures of whatever you like. I have no clue what the going rate is on most of these parts, just trying to help out a fellow forum member who may be looking for some parts before the car goes away. Parts are on a first come first serve basis.

My name is Garrett.

Texting, emailing, PM here are the best ways to contact me. I can text pictures, email pictures, or print them out and mail them to you.

330 257 9122

Or

Presley.garrett@yahoo.com

Car is located in Gilbert Arizona, 85296, just to the east of Phoenix

Current state of the vehicle:

Image

Image

Image

Image

Image

Image

Image

Image

It would be awesome if someone bought the doors, I'd hate to scrap these.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

I didn't realize how poor the pictures were until I saw them on a real computer screen. Please contact me if you want specific pictures, and I will gladly send you better pictures.

Party on!

-- Added Apr 11, 2016 1:47 PM --

To the top!

Updated pictures and information.

Buy this stuff before it get scrapped!
Last edited by white chocolate on May 02, 2016 3:17 PM, edited 6 times in total.
itsonlygeorge
Posts: 61
Joined: Jan 28, 2016 6:52 PM
Location: Maine

Re: 1986 528e Rust Free Roller Phoenix, part out, updated!

Post by itsonlygeorge »

Is the diff still available? My 2.93 in my e30 is shot to shit and dying an oily noisy death.

George
white chocolate
Posts: 428
Joined: Sep 21, 2011 9:44 PM
Location: Canton, Ohio

Re: 1986 528e Rust Free Roller Phoenix, part out, updated!

Post by white chocolate »

Still available! As far as I can tell, it is a 2.93 non lsd but I haven't crawled under the car to check the tag, just going off of the VIN check.
arnold-21
Posts: 102
Joined: Aug 17, 2013 2:08 AM

Re: 1986 528e Rust Free Roller Phoenix, part out, updated!

Post by arnold-21 »

it doesnt look like any damage to the front end how much for that radiator support and the piece where the hood latches are?
white chocolate
Posts: 428
Joined: Sep 21, 2011 9:44 PM
Location: Canton, Ohio

Re: 1986 528e Rust Free Roller Phoenix, part out, updated!

Post by white chocolate »

arnold-21 wrote:it doesnt look like any damage to the front end how much for that radiator support and the piece where the hood latches are?
PM Sent!


Actually, several PMs sent to all interested parties!
demetk
Posts: 8431
Joined: Aug 09, 2007 8:58 AM
Location: CT, USA

Re: 1986 528e Rust Free,Sheet Metal Available, updated 4/25/

Post by demetk »

Sorry guys but as you can see this part is NLA. :)

Image

white chocolate is pretty cool dude with excellent communication skills to boot, so get yourself some sheetmetal while it lasts.
EventuallyAyrton
Posts: 975
Joined: Oct 12, 2015 11:47 PM
Location: Wherever the E28 happens to be parked- Morrisville, NY

Re: 1986 528e Rust Free,Sheet Metal Available, updated 4/25/

Post by EventuallyAyrton »

What style differential mount is this? Does it have the early model mount like the 533 or the later model mount like the (later) 535? If its the later, let me know and we can talk about cutting a section of the trunk floor out.
Thanks!
white chocolate
Posts: 428
Joined: Sep 21, 2011 9:44 PM
Location: Canton, Ohio

Re: 1986 528e Rust Free,Sheet Metal Available, updated 4/25/

Post by white chocolate »

demetk wrote:Sorry guys but as you can see this part is NLA. :)


white chocolate is pretty cool dude with excellent communication skills to boot, so get yourself some sheetmetal while it lasts.
I'm blushing, thanks for the kind words!

What style differential mount is this? Does it have the early model mount like the 533 or the later model mount like the (later) 535? If its the later, let me know and we can talk about cutting a section of the trunk floor out.
Thanks!
Ya know, I don't have a clue. Let me look around (or if someone can shed some light on early/late style mounts) and i'll shoot ya a PM!

Thanks fellas
south26
Posts: 6339
Joined: Jul 13, 2008 2:16 PM
Location: Kettering, OH

Re: 1986 528e Rust Free,Sheet Metal Available, updated 4/25/

Post by south26 »

It would have the later diff mount. Changed in 85


Andy
EventuallyAyrton
Posts: 975
Joined: Oct 12, 2015 11:47 PM
Location: Wherever the E28 happens to be parked- Morrisville, NY

Re: 1986 528e Rust Free,Sheet Metal Available, updated 4/25/

Post by EventuallyAyrton »

Thanks Andy.
Demetk is absolutely right. Haven't bought anything yet but communications about parts is fantastic. Bump for a great seller


Last bumped by white chocolate on May 02, 2016 2:42 PM.
Post Reply