M30 turbo manifolds GROUP BUY ENDED

Post by **mooseheadm5** » Aug 28, 2013 1:20 PM

JesterMX6 wrote:wasn't expecting you to be taking deposits so soon!

Otis doesn't mess around!

Cjames570 · Post by **Cjames570** » Aug 29, 2013 7:18 AM

Do you have any pictures of one? I am extremely interested, but would like to see what I was going to get

Good & Tight · Post by **Good & Tight** » Aug 29, 2013 11:44 PM

Cjames570 wrote:Do you have any pictures of one? I am extremely interested, but would like to see what I was going to get

Not yet, but will have a finish like in the pic. It's a 24V manifold shown.

Design will look like this... with a 44mm vband on the wastegate provision.

JesterMX6 · Post by **JesterMX6** » Sep 06, 2013 8:52 AM

payment sent.

Post by **Brad D.** » Sep 06, 2013 11:48 AM

That is an awesome deal on an awesome manifold. I wish I had $600 to put one of these away for a rainy day.

Good & Tight · Post by **Good & Tight** » Sep 06, 2013 8:11 PM

JesterMX6 wrote:payment sent.

List updated.

Cjames570 · Post by **Cjames570** » Sep 17, 2013 7:37 PM

Just want to make sure I can still send a deposit for this? I'm ready

Good & Tight · Post by **Good & Tight** » Sep 18, 2013 8:35 PM

Cjames570 wrote:Just want to make sure I can still send a deposit for this? I'm ready

Yes, you can still send a deposit.

Cjames570 · Post by **Cjames570** » Sep 19, 2013 11:18 AM

deposit sent

Cjames570 · Post by **Cjames570** » Sep 26, 2013 12:45 PM

I know this a little off topic, but which turbo is suggested to run with this mani to be in the 400-450whp mark? I was looking into the precision 6262's with the .58 exhaust housing. Any better suggestions? I want a turbo that will spool decently, but not get pushed too hard to make the power I'm looking for.

Also, is it recommended to go with an on center housing or tang? Either of them maybe?

JesterMX6 · Post by **JesterMX6** » Sep 30, 2013 10:32 AM

with any luck, you'll have your second payment from me on friday

Good & Tight · Post by **Good & Tight** » Sep 30, 2013 8:02 PM

Cjames570 wrote:I know this a little off topic, but which turbo is suggested to run with this mani to be in the 400-450whp mark? I was looking into the precision 6262's with the .58 exhaust housing. Any better suggestions? I want a turbo that will spool decently, but not get pushed too hard to make the power I'm looking for.

Also, is it recommended to go with an on center housing or tang? Either of them maybe?

A 6262 would be a good choice with .58 turbine housing, give quick spool up and not fall off up top.
I wouldn't bother with any old technology on center type stuff.

List is updated.

JesterMX6 · Post by **JesterMX6** » Oct 01, 2013 8:51 AM

makes me happy to see a handful of M30 guys still willing to drop some coin on their projects.

Good & Tight · Post by **Good & Tight** » Oct 01, 2013 6:25 PM

JesterMX6 wrote:makes me happy to see a handful of M30 guys still willing to drop some coin on their projects.

The M30 is such a great engine to boost and make big power without having to upgrade the internals.

alpinewhite · Post by **alpinewhite** » Oct 04, 2013 1:10 AM

Hi... I'm not currently in the market for one your manifolds(Kudos btw they look like a great piece of kit) right now.. the mere thought of piecing together FI M30 intimidates the sH!T out of me, so many variables involved from turbos to IC to tuning etc.!

So with that in mind.. do you foresee building and bringing to market a tubular twin scroll M30 manifold in the near future?

Sorry for the vague question but its just seems like a no brainer to me.. but then again WTF do I know?

Cheers,

JesterMX6 · Post by **JesterMX6** » Oct 07, 2013 10:55 AM

welp. buyer backed out on the turbo i was selling so it'll be a couple more paychecks before i have the final payment. it will still be well before production is completed i believe.

Good & Tight · Post by **Good & Tight** » Oct 07, 2013 6:28 PM

JesterMX6 wrote:welp. buyer backed out on the turbo i was selling so it'll be a couple more paychecks before i have the final payment. it will still be well before production is completed i believe.

No problem, trying to get an approximate deliver date this week.

5timesturbo · Post by **5timesturbo** » Oct 12, 2013 10:22 AM

Is it too late for this group buy...??

Good & Tight · Post by **Good & Tight** » Oct 13, 2013 7:07 AM

5timesturbo wrote:Is it too late for this group buy...??

You can still get in on the group buy.

rob_A · Post by **rob_A** » Oct 16, 2013 9:38 AM

Silly question but will the hood close? Also I assume thats a paypal address to send it to?

Good & Tight · Post by **Good & Tight** » Oct 16, 2013 5:59 PM

rob_A wrote:Silly question but will the hood close? Also I assume thats a paypal address to send it to?

Yes hood will close, the paypal address is correct.

Good & Tight · Post by **Good & Tight** » Oct 19, 2013 7:18 AM

List is updated. I added some pics of the manifolds in progress.
Check out the thickness of the collector pipe.

rob_A · Post by **rob_A** » Oct 19, 2013 11:39 PM

Deposit sent

iViLe · Post by **iViLe** » Oct 22, 2013 9:10 AM

I will be interested if you can ship one to Australia?

Good & Tight · Post by **Good & Tight** » Oct 22, 2013 12:53 PM

iViLe wrote:I will be interested if you can ship one to Australia?

Yes I ship worldwide, there is an additional $80.00 to ship to Australia.

TheGraye28 · Post by **TheGraye28** » Oct 23, 2013 10:13 PM

Don't have the car yet but this is too good to pass up. Sending deposit.

iViLe · Post by **iViLe** » Oct 24, 2013 2:40 AM

Deposit sent

bIGjake · Post by **bIGjake** » Oct 24, 2013 10:18 AM

I too am interested

Good & Tight · Post by **Good & Tight** » Oct 30, 2013 6:57 AM

There are getting close to completion, updated the first post with a pic.

JesterMX6 · Post by **JesterMX6** » Oct 30, 2013 4:21 PM

MyE28.com

MyE28.com

M30 turbo manifolds GROUP BUY ENDED

turbo manifolds