FS: Sanden 508 compressor brackets

demetk · Post by **demetk** » Jun 25, 2020 9:45 AM

Update April 20,2022: I had some more brackets made.

Another batch of brackets are available.
Price has gone up slightly to $45 to account for increased material costs and postage.
This price includes US shipping and paypal fees. PM me for paypal info.

Due to new Paypal policies I only accept paypal as a gift, check or money order.

Install guide: http://www.mye28.com/viewtopic.php?f=3&t=144670. These brackets will fit e28-535, M5, e24-635 and M6 and e23-735. They also seem to fit the 528e.

cheers

doug · Post by **doug** » Jun 25, 2020 9:56 AM

demetk wrote: Jun 25, 2020 9:45 AM They also seem to fit the 528e,

Definitely, positively works on an m20 ... with minor creativity.

az533 · Post by **az533** » Jun 25, 2020 12:33 PM

Fits in an E3. The motor in this pic is an M30B34 (with a B30 oil pan) if that matters.

Dub-Nub · Post by **Dub-Nub** » Jun 26, 2020 4:28 PM

demetk wrote: Jun 25, 2020 9:45 AM Another batch of Sanden 508 compressor brackets are available.

These brackets will fit e28-535, M5, e24-635 and M6 and e23-735.

The last price for a set was $44. They've gone down in price a bit and are now $40 per set. If you're ordering 2 sets or more, then the price is $40 for the first set and $32 for each additional set that will fit into the same small flat rate box. This price includes US shipping and paypal fees.

Let me know if you would like a set.

Install guide: http://www.mye28.com/viewtopic.php?f=3&t=144670

They also seem to fit the 528e,

Dub-Nub wrote:you can add the Sanden compressor to your m20 using the brackets available on this website. They don't advertise as m20 compatible but i am using it with no modifications. I plan to put a build thread up soon as i have my a/c working ice cold with r134.
cheers

Here is the thread i made after posting that

viewtopic.php?f=3&t=152428

SCTraveler · Post by **SCTraveler** » Sep 13, 2020 11:46 AM

I would like 2 sets of your Brackets. I sent you a PM before finding this thread
Bill

metalvolks · Post by **metalvolks** » Oct 15, 2020 1:08 PM

Hi demetk - I sent you a PM regarding these brackets. I am interested in them for my M20 in a 3 series. I've heard they work with a bit of alteration. I have the original Nippendenso compressor I would like to replace with a new Sanden 508. Let me know how I can purchase them from you. Thanks!

demetk · Post by **demetk** » Feb 11, 2021 8:15 PM

Still have some brackets available.

demetk · Post by **demetk** » Feb 11, 2021 11:14 PM

Oh, and apparently these brackets work nicely on a 92 Ford Bronco. Get them before these Bronco guys snatch them up.

Foonfer · Post by **Foonfer** » Feb 12, 2021 11:40 AM

I would like (2) sets. Please PM me payment info. Thanks!

Zeuropa · Post by **Zeuropa** » Feb 13, 2021 9:53 PM

I'd be interested if they fit the b32. I assume so. Please advise.
Regardless, thanks for offering these!

demetk · Post by **demetk** » Feb 13, 2021 10:00 PM

Zeuropa wrote: Feb 13, 2021 9:53 PM I'd be interested if they fit the b32. I assume so. Please advise.
Regardless, thanks for offering these!

What year/model? We may be able to find out from RealOEM.

LarryM · Post by **LarryM** » Feb 14, 2021 4:08 PM

demetk wrote: Feb 11, 2021 8:15 PM Still have some brackets available.

PM'd

Zeuropa · Post by **Zeuropa** » Feb 15, 2021 1:12 AM

demetk wrote: Feb 13, 2021 10:00 PM What year/model? We may be able to find out from RealOEM.

'83 533i

demetk · Post by **demetk** » Feb 15, 2021 10:05 AM

Zeuropa wrote: Feb 15, 2021 1:12 AM
demetk wrote: Feb 13, 2021 10:00 PM What year/model? We may be able to find out from RealOEM.
'83 533i

I don't think they will fit this existing old style bracket. Can you confirm?

Zeuropa · Post by **Zeuropa** » Feb 15, 2021 11:04 PM

Sorry, I didn't understand how these brackets work. I assumed they replaced the stock compressor bracket. The 533i bracket is definitely different than the 535i. The next questions might be, are the b32 & b34 blocks really different, or will the b34 bracket work on the b32 block?

glowell222 · Post by **glowell222** » Feb 16, 2021 6:41 PM

demetk wrote: Feb 11, 2021 8:15 PM Still have some brackets available.

I pm'd you a couple days ago. Still have some available?

demetk · Post by **demetk** » Feb 17, 2021 9:29 AM

glowell222 wrote: Feb 16, 2021 6:41 PM
demetk wrote: Feb 11, 2021 8:15 PM Still have some brackets available.
I pm'd you a couple days ago. Still have some available?

Sorry about that. Just PM'd.

demetk · Post by **demetk** » Feb 17, 2021 9:30 AM

Zeuropa wrote: Feb 15, 2021 11:04 PM Sorry, I didn't understand how these brackets work. I assumed they replaced the stock compressor bracket. The 533i bracket is definitely different than the 535i. The next questions might be, are the b32 & b34 blocks really different, or will the b34 bracket work on the b32 block?

I would assume they have the bosses in the same locations but not certain. Anybody?

MyE24 · Post by **MyE24** » Aug 31, 2021 5:11 PM

Hi, are these still available? For an 86 635.

demetk · Post by **demetk** » Aug 31, 2021 6:18 PM

I have 3 sets left.

MyE24 · Post by **MyE24** » Aug 31, 2021 7:15 PM

I’d like to buy one, can you PM me the info?

demetk · Post by **demetk** » Aug 31, 2021 7:17 PM

MyE24 wrote: Aug 31, 2021 7:15 PM I’d like to buy one, can you PM me the info?

Sent you a PM

MyE24 · Post by **MyE24** » Aug 31, 2021 10:55 PM

Thanks, PayPal sent.

davethebari · Post by **davethebari** » Sep 21, 2021 3:00 PM

Contemplating replacing a stuffed Bosch compressor in my 1987 325i with a Sanden 508 (R134a) and I think your brackets would suit.
could you provide a dimensioned drawing, so I can verify, along with cost, availability of one pair, and postage to Australia, please?
David

Jasco1 · Post by **Jasco1** » Sep 23, 2021 6:50 AM

I’ll take a set along with one of your light switch bezels.

Jason

demetk · Post by **demetk** » Sep 23, 2021 3:01 PM

Another batch of brackets are available. Price has gone up slightly to $45 to account for increased material costs and postage. Paypal only as a gift, check or money order is accepted.

TIA

demetk · Post by **demetk** » Dec 29, 2021 2:58 PM

Update Dec 29,2021: I had some more brackets made. See the first post for details.

pmollins · Post by **pmollins** » Apr 11, 2022 8:49 PM

Hey,

I signed up on this board to get a set of these, I am hoping that they also work for an E30 M20 as well. I don't have the ability to send a DM as I'm a new user. If you see this message and still have some for sale, let me know, we'll find a way to connect.

Thanks

Patrick

1st 5er · Post by **1st 5er** » Apr 11, 2022 9:38 PM

pmollins wrote: Apr 11, 2022 8:49 PM Hey,

I signed up on this board to get a set of these, I am hoping that they also work for an E30 M20 as well. I don't have the ability to send a DM as I'm a new user. If you see this message and still have some for sale, let me know, we'll find a way to connect.

Thanks

Patrick

If demetk doesn't have any left, holler my way as I've got a set of the original batch that I've not used.

demetk · Post by **demetk** » Apr 12, 2022 6:48 PM

I've had a new batch made. I guess I never mentioned that fact.

1st 5er · Post by **1st 5er** » Apr 12, 2022 10:32 PM

demetk wrote: Apr 12, 2022 6:48 PM I've had a new batch made. I guess I never mentioned that fact.

pmollins · Post by **pmollins** » May 24, 2022 1:07 PM

@demetk - I'm new here, only really joined because I need a set of these for my e30 build. I don't have enough clout on here yet to send you a DM, if you are able to DM me, that would be great. Thanks a bunch!

demetk · Post by **demetk** » May 24, 2022 3:02 PM

pmollins wrote: May 24, 2022 1:07 PM @demetk - I'm new here, only really joined because I need a set of these for my e30 build. I don't have enough clout on here yet to send you a DM, if you are able to DM me, that would be great. Thanks a bunch!

Sent you an email. Let me know if you didn't get it.

Jlme30 · Post by **Jlme30** » Aug 13, 2022 1:54 PM

@demetk me too please! Thank you

demetk · Post by **demetk** » Aug 13, 2022 2:00 PM

I just replied to you.

amubu · Post by **amubu** » May 22, 2023 11:24 AM

@demetk I came here specifically for these brackets. Are they still up for sale? DM me if able, I just joined so I don't think I'll have that privilege yet!

41magfan · Post by **41magfan** » Jul 11, 2023 7:26 PM

If available, I would like a set as well
thanks !

eurodesign07 · Post by **eurodesign07** » Jul 30, 2023 5:52 PM

Any more brackets for e24 available?

TheWelch42 · Post by **TheWelch42** » Oct 02, 2024 4:25 PM

Happen to have any more available?