Hello,
Ive looked in the Tech FAQ and read a few posts on the topic:
https://www.mye28.com/viewtopic.php?t=137817
https://www.mye28.com/viewtopic.php?t=63315
I dont understand how loosening the 10mm nut on the throttle body lets me adjust the throttle plate clearance. In my video below, it looks like it adjust a "stopping plate" for full throttle, but nothing else. What am I missing here ?
https://www.icloud.com/photos/#089t9Iw5 ... KAUXeoQw7g
TIA
Throttle Body Adjustment
Re: Throttle Body Adjustment
David,
You just successfully troubleshot an/some issue(s) in order to pass the dreaded CA SMOG Program.
What is your motivation to go tinkering with stuff?
Inquiring minds want to know,
D.
You just successfully troubleshot an/some issue(s) in order to pass the dreaded CA SMOG Program.
What is your motivation to go tinkering with stuff?
Inquiring minds want to know,
D.
Re: Throttle Body Adjustment
Ha !
After I plugged all the vacuum leaks, replaced the O2 sensor, and cleaned the ICV for our friends a CARB, it idles like crap. So Im retracing my steps to figure out what I broke. But of course, one rabbit hole leads to another....
After I plugged all the vacuum leaks, replaced the O2 sensor, and cleaned the ICV for our friends a CARB, it idles like crap. So Im retracing my steps to figure out what I broke. But of course, one rabbit hole leads to another....