Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Dec 16, 2014 12:33 AM
David - I sent you a PM on the 10th. Did you get that?
Thanks,
Dave
Thanks,
Dave
MyE28.com
BMW E28 5 Series Enthusiast Community
http://mye28.com/
PEDAL BRACKET Reinforcement / repair - REV. 6-welded tab
Page 9 of 14
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Dec 16, 2014 10:41 AM
paypal sent
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Dec 27, 2014 9:30 AM
BUMP, CAN SHIP ASAP 
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Jan 25, 2015 11:14 AM
revision #5 in stock, and ready too ship asap, rev #5 change is minor enlargement of 6mm slots, dave
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Jan 25, 2015 12:06 PM
Payment sent! Thanks!
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Feb 04, 2015 9:30 AM
BUMP
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Feb 27, 2015 1:00 PM
Payment sent. Thanks David!
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Mar 14, 2015 9:24 AM
BUMP
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Apr 13, 2015 9:29 AM
BUMP---BUMP
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Apr 21, 2015 1:49 PM
Payment sent -- thanks!
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: May 11, 2015 9:29 AM
BUMP
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: May 11, 2015 1:37 PM
Paypal sent. Thanks!
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: May 22, 2015 6:59 PM
received my revision 5 bracket today. can't wait, actually i can, to install it. not looking forward to contorting for the install. i did notice, however, an inch and a half or so crack. i'm hoping this bracket will help resolve this. or do i need to replace the clutch/brake pedal bracket completely? that seems like a major PITA.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: May 25, 2015 4:40 PM
UPDATE:
installed my roth pedal bracket reinforcement. took a wee bit longer than i'd anticipated, about 2 hrs. there's not a whole lot of space underneath in the pedal area. i used a 10 ml offset box wrench to remove the original bolts (# 2&3) in dave's installation instructions. #1 came off easily with a 13ml deep socket.
reinstallation was a bit dicey as well. #1 screw went on pretty easy. #'s 2 & 3 were trickier. i had to remove the nut/bolt from the master cylinder piston to in order to line everything up to reinstall dave's bolts. if you don't you'll be spending way too much time and energy trying to force them to realign. it took me about 10 min to figure this out. i was able to get #3 nut to go on the bolt but lost #2 nut and the extra one as well. i couldn't get my fingers around the mc to install the nut. i'll get it on there, it'll just take a few more attempts.
clutch pedal play feels solid. my pedal doesn't return all the way, however. i think i may have a bad slave. going back under in a few days to check this out.
btw: my original bracket has a 1 1/2 inch crack in it and i realize that there was more play when engaging the pedal than i thought now that the roth bracket is installed.
big thanks to dave for his insight in making this bracket and making it available for the rest of us.
installed my roth pedal bracket reinforcement. took a wee bit longer than i'd anticipated, about 2 hrs. there's not a whole lot of space underneath in the pedal area. i used a 10 ml offset box wrench to remove the original bolts (# 2&3) in dave's installation instructions. #1 came off easily with a 13ml deep socket.
reinstallation was a bit dicey as well. #1 screw went on pretty easy. #'s 2 & 3 were trickier. i had to remove the nut/bolt from the master cylinder piston to in order to line everything up to reinstall dave's bolts. if you don't you'll be spending way too much time and energy trying to force them to realign. it took me about 10 min to figure this out. i was able to get #3 nut to go on the bolt but lost #2 nut and the extra one as well. i couldn't get my fingers around the mc to install the nut. i'll get it on there, it'll just take a few more attempts.
clutch pedal play feels solid. my pedal doesn't return all the way, however. i think i may have a bad slave. going back under in a few days to check this out.
btw: my original bracket has a 1 1/2 inch crack in it and i realize that there was more play when engaging the pedal than i thought now that the roth bracket is installed.
big thanks to dave for his insight in making this bracket and making it available for the rest of us.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: May 25, 2015 6:36 PM
Mine went in a couple weeks ago and it's a great improvement! Thanks Dave.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Jun 15, 2015 2:50 AM
I've got an '85 Euro E24, so if one of these will fit, and if one is available, please send me a PM with payment instructions and I'll send the PayPal ASAP. Thanks.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Jun 15, 2015 12:26 PM
Hi Dave:
PayPal on the way - thanks for the quick email reply.
PayPal on the way - thanks for the quick email reply.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Jun 15, 2015 3:18 PM
Payment sent.
I haven't looked at my e23 pedal bracket yet to check for myself, but are they also prone to this failure?
Edit: Thanks, Dave. I got that part in the mail before I even started looking for it.
I haven't looked at my e23 pedal bracket yet to check for myself, but are they also prone to this failure?
Edit: Thanks, Dave. I got that part in the mail before I even started looking for it.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Jul 06, 2015 9:38 AM
BUMP
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Aug 20, 2015 9:59 AM
new batch of parts in process, have non tab in stock, tab part done in 2 weeks, dave
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Sep 28, 2015 2:15 AM
Payment sent!
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Oct 29, 2015 1:47 PM
Do you currently have any tabbed brackets for an E28 available?
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Nov 24, 2015 8:15 AM
Just sent my payment via PayPal. Please let me know that it is happening.
Thanks!
Thanks!
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Nov 25, 2015 11:14 AM
Nice elegant solution, never saw this thread. Hi from MN, I'm in Mendota Heights!
Doublechecked parts CD to see if pedal bracket was shared with the E12 but they look completely different so since I'm E28-less I don't need one of these.
Doublechecked parts CD to see if pedal bracket was shared with the E12 but they look completely different so since I'm E28-less I don't need one of these.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Nov 25, 2015 5:56 PM
Paypal sent
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Dec 10, 2015 11:28 AM
Endorsement/Testimonial: I am very happy with this as my clutch has never felt better, nor have I ever felt more confident in it. As everybody seems to say it is only a matter of time before they crack. Solid Seller!
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Dec 29, 2015 11:51 PM
Have plenty of both in stock can ship asap, thanks dave
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Dec 31, 2015 11:44 AM
I'll take a Bracket with welded tab up to Canada, wanted to post here to confirm before sending payment - a total of $50 shipped? 1987 528e
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Dec 31, 2015 2:06 PM
Payment sent for two brackets with tabs, one each for e28 & e30.
Re: PEDAL BRACKET Reinforcement / repair - REV. 5-welded tab
Posted: Jan 05, 2016 7:21 AM
Received..thx