PEDAL BRACKET Reinforcement / repair - REV. 6-welded tab

dna1943 · Post by **dna1943** » Sep 06, 2012 5:08 PM

BUMP (for being an honest guy)
Thanks for the quick reply.
Sorry it won't work on a 735i

DaveA

DAVID PEPIN · Post by **DAVID PEPIN** » Sep 17, 2012 8:55 AM

DAVID PEPIN · Post by **DAVID PEPIN** » Sep 29, 2012 10:43 AM

BUMP for rev 3 now ready, just a little differant than the rev 2, taller with base hole slotted and the 6mm holes increased to .325

1st 5er · Post by **1st 5er** » Sep 29, 2012 12:40 PM

DAVID PEPIN wrote: rev 3

???

TheLazyDog · Post by **TheLazyDog** » Sep 29, 2012 2:19 PM

1st 5er wrote:
DAVID PEPIN wrote: rev 3
???

x2

DAVID PEPIN · Post by **DAVID PEPIN** » Oct 10, 2012 12:30 PM

BUMP, FOR A PRODUCT THAT WILL STOP YOUR SUPPORT FROM CRACKING AND DESTROYING THE MASTER AT THE SAME TIME

DAVID PEPIN · Post by **DAVID PEPIN** » Oct 25, 2012 12:23 AM

BUMP, HAVE BRACKETS IN STOCK, CAN SHIP ASAP. DAVE

slammin_e28 · Post by **slammin_e28** » Nov 05, 2012 10:07 AM

Got mine! Fast shipping too!

Thanks Dave!

saigon535 · Post by **saigon535** » Nov 05, 2012 5:07 PM

In for one. Sending payment soon. Thanks, Dave!

RVigre · Post by **RVigre** » Nov 13, 2012 9:33 PM

Another satisfied customer here.
I finally installed the bracket today after receiving it in June. Pretty sure my bracket was cracked since I could hear and feel a small 'pop' in the pedal when depressing the clutch pedal. I could not see a crack in the support bracket. Since installation earlier today the pedal feels solid. No more unwanted noises when depressing the clutch pedal.......Yea Baby !!!

Thanks Dave !!! Great Product !!!!

Ray

M5BB · Post by **M5BB** » Nov 14, 2012 9:28 AM

Great idea and execution Dave.

Don't need one but want to buy one for the inevitable in the M5.

Do you have some ready?

desmofan · Post by **desmofan** » Nov 14, 2012 10:00 AM

ACHTUNG · Post by **ACHTUNG** » Nov 14, 2012 10:16 AM

I'm interested in one as well.

Mike K · Post by **Mike K** » Nov 15, 2012 8:27 AM

PayPal sent. Thanks Dave!

Elliott · Post by **Elliott** » Nov 18, 2012 8:26 PM

Paypal sent....thanks.

DanOKC · Post by **DanOKC** » Nov 26, 2012 8:07 PM

Paypal sent.

Thanks

DerPanzer · Post by **DerPanzer** » Nov 26, 2012 10:59 PM

Got my bracket just days after sending payment to David.

The bracket is a very nicely made thing. Quite a substantial hunk of metal, I feel confident the bracket will keep the pedal box from flexing too much.

The fit is perfect.

Installation is easy, but just incase you get confused, David includes a nice set of instructions and a color photo that will set you right.

Thank you David! You've got another happy customer here.

Mike in Seattle · Post by **Mike in Seattle** » Nov 27, 2012 12:07 AM

Paypal sent.

Thanks,

Mike

85 535i · Post by **85 535i** » Nov 27, 2012 5:51 AM

Payment Sent from asharchaudhary1@gmail.com. Looking forward to getting this soon.

Elliott · Post by **Elliott** » Nov 27, 2012 5:47 PM

Dave - has the bracket shipped yet? Please give me a heads up when it does.
Thanks

gmb49all · Post by **gmb49all** » Nov 28, 2012 11:38 AM

Payment sent from mustanglau@yahoo.com for pedal bracket reinforcement plus the SS tab. Thanks!

comex 1665 · Post by **comex 1665** » Nov 28, 2012 5:07 PM

Hey David, I just sent you an e-mail about the bracket. I need one pretty bad

DAVID PEPIN · Post by **DAVID PEPIN** » Dec 07, 2012 9:16 AM

BUMP/BUMP

bk_856er · Post by **bk_856er** » Dec 08, 2012 7:40 PM

I'm in for one - need asap! Email sent.

BK

comex 1665 · Post by **comex 1665** » Dec 10, 2012 2:13 PM

I got mine! Installation was simple, although bolt #2 was a bit of a PITA to get to

I still a lot of defection in the clutch pedal and master cyl bracketry-- but its better. Perhaps I have the wrong combo of hydraulics, The pedal is feel is monsterously stiff. It looks as I have a 3/4 ID master cyl. Is that what it's supposed to be?

Thanks David! My car can go into gear from a dead stop much easier!

bk_856er · Post by **bk_856er** » Dec 10, 2012 3:48 PM

comex, was your bracket already cracked and did you opt for the stainless support tab?

Almost sounds like you have other clutch issues and the extra pedal force causes additional flex.

I have a 1" hairline crack in the usual spot, very similar to the one shown a few pages up with the bracket installed. Hoping the bracket + tab will stabilize the area sufficiently.

The plastic elbow on my master snapped clean off and dumped fluid. I mangled the grommet trying to remove the broken piece with the master in place. Removed the master and noticed the hairline crack. Also found a bent overtravel spring. Replacing the elbow, master, spring and adding Dave's bracket. Seriously considering a whole new pedal box as well.

BK

gomifune · Post by **gomifune** » Dec 13, 2012 11:07 AM

Payment sent. Thx for building these.

bk_856er · Post by **bk_856er** » Dec 14, 2012 8:17 PM

Received my bracket today. Looks great and thanks for the quick delivery!

BK

DAVID PEPIN · Post by **DAVID PEPIN** » Dec 23, 2012 9:17 AM

BUMP, HAVE 15 REV 3 LEFT, DON'T KNOW IF I WILL DO ANOTHER BATCH, DAVE

bk_856er · Post by **bk_856er** » Dec 28, 2012 7:15 PM

Finally got my new pedal box. Bracket fits very precisely onto the welded nuts. My E24 is waiting in the background...

BK

MyE28.com

MyE28.com

PEDAL BRACKET Reinforcement / repair - REV. 6-welded tab

post subject

post subject

posr subject

PP'd