TexFest IV - Parts Swap and/or For Sale
TexFest IV - Parts Swap and/or For Sale
Here's the thread guys...
Have at it.
I'll join you guys later...
Have at it.
I'll join you guys later...
Have a bunch of misc. E32 parts that I pulled when my car was rear-ended. Headlights, tail-lights, all the relays and modules from under the hood, grill pieces, and more I've forgotten about.
Looking for an E28 fusebox, windshield sprayer nozzles, drivers side door lock parts, and whatever other crap you might have.
Looking for an E28 fusebox, windshield sprayer nozzles, drivers side door lock parts, and whatever other crap you might have.
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
I've got one if you don't, Sherman. I can bring some other e34 goodies from it if there is interest... I've got the 525i in my garage right now and plan on pulling the motor & driveline from it, and could bring along the 5-speed swap bits or anything that's not already spoken for. I've promised the rolling shell to a guy, and I'm taking the motor and whatever else is needed to swap it into my eta. Mechanically and electrically the car is pretty decent, but the interior is in tough shape and there is rust outside.1st 5er wrote:I'll check.sixeye wrote:Anyone have an E34 OBC?
I'm good with you bringing yours then Dave.davintosh wrote:I've got one if you don't, Sherman. I can bring some other e34 goodies from it if there is interest... I've got the 525i in my garage right now and plan on pulling the motor & driveline from it, and could bring along the 5-speed swap bits or anything that's not already spoken for. I've promised the rolling shell to a guy, and I'm taking the motor and whatever else is needed to swap it into my eta. Mechanically and electrically the car is pretty decent, but the interior is in tough shape and there is rust outside.1st 5er wrote:I'll check.sixeye wrote:Anyone have an E34 OBC?
I'll keep mine, just in case. Looks like we'll be keeping two E34's around for a while.
5 speed swap for an M20 car, or an M50?davintosh wrote:I've got one if you don't, Sherman. I can bring some other e34 goodies from it if there is interest... I've got the 525i in my garage right now and plan on pulling the motor & driveline from it, and could bring along the 5-speed swap bits or anything that's not already spoken for. I've promised the rolling shell to a guy, and I'm taking the motor and whatever else is needed to swap it into my eta. Mechanically and electrically the car is pretty decent, but the interior is in tough shape and there is rust outside.1st 5er wrote:I'll check.sixeye wrote:Anyone have an E34 OBC?
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Anyone interested in a of set 15" A.R.E. 398 wheels that could be classified as BBS RS replicas. One of them is missing the center cap, but all would clean up extremely well if re-polished. I'm thinking this is a fair price & hopefull I'm not too far out of line. I also have a 16" set that needs center caps that I may put up for sale as well.
So whats in my parts box coming to TexFest:
-E34 Elipsoids with rings and all - nik77356
-E36 Euro M3 short shifter - nik77356
-E34 540/6 shifter
-E39 shift knob no sticker otherwise in great condition
-E39 CD Changer - worked last time I checked
Not bringing with me:
-E34 late stock steering wheel - just looked at it from sitting in the parts pile the slip ring got busted so it will not switch the turn signals off. Worthless..
-E34 late mirror keeping those never know
-E34 amber corners and sidemarkers - no one is probably interested since the majority of cars are E28 and the E34 guys have theirs on Plus you never know.
-E34 freebeam worthless to the general population - i find them cool.
-E34 Elipsoids with rings and all - nik77356
-E36 Euro M3 short shifter - nik77356
-E34 540/6 shifter
-E39 shift knob no sticker otherwise in great condition
-E39 CD Changer - worked last time I checked
Not bringing with me:
-E34 late stock steering wheel - just looked at it from sitting in the parts pile the slip ring got busted so it will not switch the turn signals off. Worthless..
-E34 late mirror keeping those never know
-E34 amber corners and sidemarkers - no one is probably interested since the majority of cars are E28 and the E34 guys have theirs on Plus you never know.
-E34 freebeam worthless to the general population - i find them cool.
I have one in the trunk. Its probably the original tire on it since 1995. The only good thing about it is when doing front wheel bearing you can drop the car on the ground and fit the 42mm through the opening in the center.Nebraska_e28 wrote:Does anyone happen to have 2 of these in case we dont find any in San Antonio?
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
The black Vaders that I had installed in my E28 ///M5 are now for sale.
Along with the set of wheels/tires I'm bringing, not exactly sure how I'll fit them in, but I will, if somebody wants 'em.
They are overall in excellent condition except for the one small "repaired" hole, not done by me, on the drivers' side bolster.
These will come with the frame rail adapters I made for them to fit into the E28.
They can be yours, with or without the adapters, for the TexFest LSB&F price of $450.00 delivered.
I'll even throw in assisted installation at the event, at no additional cost.
Along with the set of wheels/tires I'm bringing, not exactly sure how I'll fit them in, but I will, if somebody wants 'em.
They are overall in excellent condition except for the one small "repaired" hole, not done by me, on the drivers' side bolster.
These will come with the frame rail adapters I made for them to fit into the E28.
They can be yours, with or without the adapters, for the TexFest LSB&F price of $450.00 delivered.
I'll even throw in assisted installation at the event, at no additional cost.
Last edited by 1st 5er on Oct 11, 2012 3:15 AM, edited 1 time in total.
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Gulp... I'm hesitant to let these go, but anyone interested in a set of staggered throwing stars? front 17x8 rear 17x9 These have been stripped, polished, center powdercoated black, & lip powdercoated clear. 3 are from my original set & a forth needs refinished due to replacing a bent wheel. PM for details.
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
$50 for two & we'll take em.1st 5er wrote:Pretty sure I have a set, of four.Nebraska_e28 wrote:Does anyone happen to have 2 of these in case we dont find any in San Antonio?
Gotcha covered!1st 5er wrote:I'll take those.Nebraska_e28 wrote:... have a set of zmbluedevil euro bumper mounts that allow you to mount euro bumpers to US frame rails. $60.
Swap meet, get it?Nebraska_e28 wrote:$50 for two & we'll take em.1st 5er wrote:Pretty sure I have a set, of four.Nebraska_e28 wrote:Does anyone happen to have 2 of these in case we dont find any in San Antonio?
Gotcha covered!1st 5er wrote:I'll take those.Nebraska_e28 wrote:... have a set of zmbluedevil euro bumper mounts that allow you to mount euro bumpers to US frame rails. $60.
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
I'll ask Wes if he has anything to swap since this is for him.1st 5er wrote:Swap meet, get it?Nebraska_e28 wrote:$50 for two & we'll take em.1st 5er wrote:Pretty sure I have a set, of four.Nebraska_e28 wrote:Does anyone happen to have 2 of these in case we dont find any in San Antonio?
Gotcha covered!1st 5er wrote:I'll take those.Nebraska_e28 wrote:... have a set of zmbluedevil euro bumper mounts that allow you to mount euro bumpers to US frame rails. $60.
Never mind, they are for Wes. MyNebraska_e28 wrote:I'll ask Wes if he has anything to swap since this is for him.1st 5er wrote:Nebraska_e28 wrote:$50 for two & we'll take em.1st 5er wrote:Pretty sure I have a set, of four.Nebraska_e28 wrote:Does anyone happen to have 2 of these in case we dont find any in San Antonio?
Gotcha covered!1st 5er wrote:I'll take those.Nebraska_e28 wrote:... have a set of zmbluedevil euro bumper mounts that allow you to mount euro bumpers to US frame rails. $60.
Swap meet, get it?
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Sorry; missed this question last month.Greg E34 wrote:5 speed swap for an M20 car, or an M50?davintosh wrote:I've got one if you don't, Sherman. I can bring some other e34 goodies from it if there is interest... I've got the 525i in my garage right now and plan on pulling the motor & driveline from it, and could bring along the 5-speed swap bits or anything that's not already spoken for. I've promised the rolling shell to a guy, and I'm taking the motor and whatever else is needed to swap it into my eta. Mechanically and electrically the car is pretty decent, but the interior is in tough shape and there is rust outside.1st 5er wrote:I'll check.sixeye wrote:Anyone have an E34 OBC?
It's an M20, but I was planning on keeping the transmission with the motor anyway. Unfortunately plans changed and I won't be TexFest-ing this weekend; but if there's any interest in the swap bits off the e34, I can ship it also.
The ones I have are markedNebraska_e28 wrote:1179761 should be it. Kba 41352 is another number.1st 5er wrote:What are the #'s on the wheels for Wes?
Wanna make sure I bring the right ones.
1129030
7J x 15H2
BMW e 20
Let me know if these are the ones to throw in the car.
See you guys in a few hours.
Are Wes' wheels the chromed version?1st 5er wrote:The ones I have are markedNebraska_e28 wrote:1179761 should be it. Kba 41352 is another number.1st 5er wrote:What are the #'s on the wheels for Wes?
Wanna make sure I bring the right ones.
1129030
7J x 15H2
BMW e 20
Let me know if these are the ones to throw in the car.
See you guys in a few hours.
Nathan just got here and his has the 1179761 number stamped on it, and they are chromed.
-
- Beamter
- Posts: 9058
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Painted, no chrome1st 5er wrote:Are Wes' wheels the chromed version?1st 5er wrote:The ones I have are markedNebraska_e28 wrote:1179761 should be it. Kba 41352 is another number.1st 5er wrote:What are the #'s on the wheels for Wes?
Wanna make sure I bring the right ones.
1129030
7J x 15H2
BMW e 20
Let me know if these are the ones to throw in the car.
See you guys in a few hours.
Nathan just got here and his has the 1179761 number stamped on it, and they are chromed.