Holy Grail Labs - M30B35 Intake Manifold Bracket

[tig]

All recent orders shipped this morning.

[tig]

You can now get these in black powder coat as well as the previously available bare and zinc coated. Supplies limited.



http://www.kindel.com/store

I will be bringing a few of each kind to Sandy Eggo.

[Brian D]

I've been remiss in ordering mine but it looks like I will have an engine to bolt it to so...are there any of the zinc coated left?

[tig]

I've been remiss in ordering mine but it looks like I will have an engine to bolt it to so...are there any of the zinc coated left?

Yes. I have some of each. www.kindel.com/store

[Brian D]

And done. Thanks Charlie.

[tig]

^

[tig]

Bump.

[tig]

T2T

[tig]

Bumpers. Still have plenty of bare, zinc, and powder coated. Buy now. Buy often. www.kindel.com/store

[tig]

.pmuB

[tig]

Just like the title of this thread says, you need one of these brackets. You do!

Operators are standing by to take your order at www.kindel.com/store.

[tig]

Shipped two of these last week. Supplies are starting to run low...

[danc]

FWIW, I agree with Kyle that the bent flat steel may not be as strong, and hence more prone to bending, than the original c-channel. Some gusseting (?) in the area of the bends would substantially increase the strength, but of course would also substantially increase the cost.
Has anyone tried using both brackets together?

For 30 bucks, I'll take a chance. Ordered a powder coated one today.
Thanks for doing all the work involved with this.

[tig]

FWIW, I agree with Kyle that the bent flat steel may not be as strong, and hence more prone to bending, than the original c-channel. Some gusseting (?) in the area of the bends would substantially increase the strength, but of course would also substantially increase the cost.
Has anyone tried using both brackets together?

For 30 bucks, I'll take a chance. Ordered a powder coated one today.
Thanks for doing all the work involved with this.

This will ship today. Thanks.

Note the Zinc Plated brackets are now SOLD OUT. I only have a few black powder-coated and bare metal brackets left.

[1st 5er]

Hope I can find mine when the time is right.

[tig]

Bump.

[tig]

B U M P.

[tig]

Still have a few of these left. www.kindel.com/store to buy.

[Angel]

Placed order earlier this morning.

[tig]

And it's shipping in about 10 minutes

[Angel]

And it's shipping in about 10 minutes

Hopefully this goes a bit smoother than last time. Haha

[tig]

The powder coated versions are all sold out. Only a few bare metal brackets left.

[tig]

Some fine chap just bought 4 of these.

I'll sell 2 or 3 more then I'm going to shut down the store and hoard the rest for the apocalypse.

[Stature]

Glad I found this before the apocalypse hoarding began! I've got a b35 to drop in this spring.

You should mention this sort of project on Instagram, I would have seen it months ago and you would already have my money!

[tig]

Glad I found this before the apocalypse hoarding began! I've got a b35 to drop in this spring.

You should mention this sort of project on Instagram, I would have seen it months ago and you would already have my money!

Got your order. Will ship today.

[tig]

SOLD OUT.

There are no more.

[tig]

Bump.

Should I make more of these?

[funkycharms]

I'm Interested

[thrty8street]

I'll take one.

[nikos_kalogridis]

I'll take one as well