WTB Shawn D VDO mount

Frybrid 524td · Post by **Frybrid 524td** » Apr 23, 2012 11:54 AM

shagrath wrote:
m-racer wrote:No sucess. I guess I am going to install the Hartge set up. Hate to drill holes in an uncracked dash.
Does BMP still sell their dash setup?

NLA. BMP is a copy of the Hartge dash pod anyway.

shagrath · Post by **shagrath** » Apr 23, 2012 12:01 PM

Frybrid 524td wrote:
shagrath wrote:
m-racer wrote:No sucess. I guess I am going to install the Hartge set up. Hate to drill holes in an uncracked dash.
Does BMP still sell their dash setup?
NLA. BMP is a copy of the Hartge dash pod anyway.

Right, but does BMP still offer it?

graphite · Post by **graphite** » Apr 23, 2012 12:08 PM

If you want to pester him just keep posting in this thread and use punctuation errors and spelling mistakes. You know he reads every post in order to correct them. Eventually this thread will overwhelm him.

AT8M5 · Post by **AT8M5** » Apr 23, 2012 12:08 PM

m-racer wrote:No sucess. I guess I am going to install the Hartge set up. Hate to drill holes in an uncracked dash.

I see what you did there, guilt trip.

Karl

m-racer · Post by **m-racer** » Apr 23, 2012 12:27 PM

JBort wrote:Shawn D never used VDO gauges...

I know, but I would. I had the set up in the B9.

m-racer · Post by **m-racer** » Apr 23, 2012 12:28 PM

AT8M5 wrote:
m-racer wrote:No sucess. I guess I am going to install the Hartge set up. Hate to drill holes in an uncracked dash.
I see what you did there, guilt trip.

Karl

Shush

Frybrid 524td · Post by **Frybrid 524td** » Apr 23, 2012 12:33 PM

shagrath wrote:
Frybrid 524td wrote:
shagrath wrote:
m-racer wrote:No sucess. I guess I am going to install the Hartge set up. Hate to drill holes in an uncracked dash.
Does BMP still sell their dash setup?
NLA. BMP is a copy of the Hartge dash pod anyway.
Right, but does BMP still offer it?

NLA = No Longer Available

shagrath · Post by **shagrath** » Apr 23, 2012 12:55 PM

Frybrid 524td wrote:
shagrath wrote:
Frybrid 524td wrote:
shagrath wrote:
m-racer wrote:No sucess. I guess I am going to install the Hartge set up. Hate to drill holes in an uncracked dash.
Does BMP still sell their dash setup?
NLA. BMP is a copy of the Hartge dash pod anyway.
Right, but does BMP still offer it?
NLA = No Longer Available

Sorry I thought you meant the Hartge original was NLA. Thanks!

bhopp · Post by **bhopp** » Apr 23, 2012 12:57 PM

What does the Heart Age one look like, does any one have a picture?

JBort · Post by **JBort** » Apr 23, 2012 2:01 PM

m-racer wrote:
JBort wrote:Shawn D never used VDO gauges...
I know, but I would.

Me too!

m-racer · Post by **m-racer** » Apr 23, 2012 2:43 PM

bhopp wrote:What does the Heart Age one look like, does any one have a picture?

I don't have a pic, but if you go to the RonP H5S build thread, it has one.

Frybrid 524td · Post by **Frybrid 524td** » Apr 23, 2012 3:51 PM

bhopp wrote:What does the Heart Age one look like, does any one have a picture?

Auto correct!

bhopp · Post by **bhopp** » Apr 23, 2012 4:02 PM

Frybrid 524td wrote:
bhopp wrote:What does the Heart Age one look like, does any one have a picture?
Auto correct!

Yep my stupid phone.

Post by **Shawn D.** » Apr 23, 2012 7:45 PM

Thanks for the compliments folks! Back then, I had little money and plenty of time, now I have sufficient money and little spare time. If the situation reverses, you can be certain that the gauge panels and LEDs will go back into production. FWIW, Ken's panel was a one-off. I haven't done any others in that configuration.

graphite wrote:If you want to pester him just keep posting in this thread and use punctuation errors and spelling mistakes. You know he reads every post in order to correct them. Eventually this thread will overwhelm him.

LOL, almost -- Najajoth told me about this thread. My grammar-sense hadn't kicked in.

bhopp wrote:
Frybrid 524td wrote:
bhopp wrote:What does the Heart Age one look like, does any one have a picture?
Auto correct!
Yep my stupid phone.

Nope, it wasn't your phone. That's my autocorrect when you spell it wrong.

9mil · Post by **9mil** » Apr 23, 2012 8:17 PM

Damn ... I just realized you live down the street from me... I'm in Dunwoody near 400....
I currently have half a drill bit box with a hole in it big enough to fit a innovate gauge, led and button- in hopes this thread would bring forth the e24 2 ashtray gauge panel....
Shawn... Only you can make my interior not look like shit... Only you..

For all the little kids out there... Just one more time!

9

bhopp · Post by **bhopp** » Apr 23, 2012 9:01 PM

Shawn D. wrote:Thanks for the compliments folks! Back then, I had little money and plenty of time, now I have sufficient money and little spare time. If the situation reverses, you can be certain that the gauge panels and LEDs will go back into production. FWIW, Ken's panel was a one-off. I haven't done any others in that configuration.

Shawn you should just let Mooseheadm5 make them for you he seems pretty willing,

mooseheadm5 wrote:I wish Shawn would just let me make them for him.

You could charge a fee for him to use your design, there seems to be quite the market for these things.

S38Mike · Post by **S38Mike** » Apr 23, 2012 11:19 PM

bhopp wrote:
Shawn D. wrote:Thanks for the compliments folks! Back then, I had little money and plenty of time, now I have sufficient money and little spare time. If the situation reverses, you can be certain that the gauge panels and LEDs will go back into production. FWIW, Ken's panel was a one-off. I haven't done any others in that configuration.
Shawn you should just let Mooseheadm5 make them for you he seems pretty willing,

mooseheadm5 wrote:I wish Shawn would just let me make them for him.
You could charge a fee for him to use your design, there seems to be quite the market for these things.

please please please please please please please!

Post by **Shawn D.** » Apr 24, 2012 11:41 AM

S38Mike wrote:
bhopp wrote:
Shawn D. wrote:Thanks for the compliments folks! Back then, I had little money and plenty of time, now I have sufficient money and little spare time. If the situation reverses, you can be certain that the gauge panels and LEDs will go back into production. FWIW, Ken's panel was a one-off. I haven't done any others in that configuration.
Shawn you should just let Mooseheadm5 make them for you he seems pretty willing,

mooseheadm5 wrote:I wish Shawn would just let me make them for him.
You could charge a fee for him to use your design, there seems to be quite the market for these things.
please please please please please please please!

I will consider it, BUT would prefer that any produced go to the folks on the waiting list before anyone else. That means most of you begging for them have over a dozen folks in line ahead of you (if they still want them).

AT8M5 · Post by **AT8M5** » Apr 24, 2012 12:14 PM

Shawn D. wrote: I will consider it, BUT would prefer that any produced go to the folks on the waiting list before anyone else. That means most of you begging for them have over a dozen folks in line ahead of you (if they still want them).

The more that are produced means lower production cost, and more royalties for you!

Karl

OcCoupe · Post by **OcCoupe** » Apr 24, 2012 12:51 PM

I would put my hand up for a couple.

S38Mike · Post by **S38Mike** » Apr 24, 2012 1:38 PM

Shawn D. wrote:
S38Mike wrote:
bhopp wrote:
Shawn D. wrote:Thanks for the compliments folks! Back then, I had little money and plenty of time, now I have sufficient money and little spare time. If the situation reverses, you can be certain that the gauge panels and LEDs will go back into production. FWIW, Ken's panel was a one-off. I haven't done any others in that configuration.
Shawn you should just let Mooseheadm5 make them for you he seems pretty willing,

mooseheadm5 wrote:I wish Shawn would just let me make them for him.
You could charge a fee for him to use your design, there seems to be quite the market for these things.
please please please please please please please!
I will consider it, BUT would prefer that any produced go to the folks on the waiting list before anyone else. That means most of you begging for them have over a dozen folks in line ahead of you (if they still want them).

I'll happily wait for others on the old list to get their's before I get mine as long as I still get one. That's fair. Hell, I'll take two to have a spare. Can we dig up the old list somehow and post it so all of us new buyers can be added? The demand clearly exists and someone is willing to make new units.

bhopp · Post by **bhopp** » Apr 24, 2012 1:48 PM

Shawn D. wrote:
S38Mike wrote:
bhopp wrote:
Shawn D. wrote:Thanks for the compliments folks! Back then, I had little money and plenty of time, now I have sufficient money and little spare time. If the situation reverses, you can be certain that the gauge panels and LEDs will go back into production. FWIW, Ken's panel was a one-off. I haven't done any others in that configuration.
Shawn you should just let Mooseheadm5 make them for you he seems pretty willing,

mooseheadm5 wrote:I wish Shawn

would just let me make them for him.
You could charge a fee for him to use your design, there seems to be quite the market for these things.
please please please please please please please!
I will consider it, BUT would prefer that any produced go to the folks on the waiting list before anyone else. That means most of you begging for them have over a dozen folks in line ahead of you (if they still want them).

I am more than willing to wait and I would agree people that have been waiting should get them first.

Post by **tsmall07** » Apr 24, 2012 2:18 PM

I've been waiting for years, but I didn't mention it because I didn't expect there to be any movement. I guess that means I'm not on the list.

When I first read of these (probably 5 years ago), some people had already been on the list for a few years. I definitely want! Somebody get Shawn fired so that we can get some gauge mounts!

Post by **Shawn D.** » Apr 24, 2012 4:49 PM

tsmall07 wrote:Somebody get Shawn fired so that we can get some gauge mounts!

Get me fired, huh? Not a good way to get one!

Post by **tsmall07** » Apr 24, 2012 5:03 PM

Shawn D. wrote:
tsmall07 wrote:Somebody get Shawn fired so that we can get some gauge mounts!
Get me fired, huh? Not a good way to get one!

That's why I said somebody.

AT8M5 · Post by **AT8M5** » Apr 24, 2012 8:40 PM

Shawn D. wrote:Not a good way to get one!
NO POD FOR YOU, NEXT!

MShimon · Post by **MShimon** » Apr 24, 2012 8:58 PM

I have been lusting after one for a while now too; definitely put me down for one!

Ken H. · Post by **Ken H.** » Apr 24, 2012 9:19 PM

MShimon wrote:I have been lusting after one for a while now too; definitely put me down for one!

Shaun D. mount. Phealz sew gude . . .

BDK · Post by **BDK** » Apr 24, 2012 9:43 PM

I am back on the ShawnD list now too,
I left the line to go pee buts plz let me back in line

L_N_Love · Post by **L_N_Love** » Apr 24, 2012 9:50 PM

Put me down for one. Thanks.

MyE28.com

MyE28.com

WTB Shawn D VDO mount