Discussion pertaining to positive pressure E28s.
-
bahnstormer
- Posts: 212
- Joined: Feb 12, 2006 12:00 PM
Post
by bahnstormer »
i broke mine again
2nd one in a year's time
jw what 'll happen when i bolt the turbo on -[
poor little rubber part
-
Skeen
- Posts: 2208
- Joined: Feb 12, 2006 12:00 PM
- Location: Charlotte, NC
-
Contact:
Post
by Skeen »
Your subject seems to ask a question, but you also seem to know the answer in your message body. I'm confused.
Yes, there's a flex disk. Your driveshaft u-joints might be worn out if you're going through them fast without excessive abuse.
-
bahnstormer
- Posts: 212
- Joined: Feb 12, 2006 12:00 PM
Post
by bahnstormer »
Skeen wrote:Your subject seems to ask a question, but you also seem to know the answer in your message body. I'm confused.
Yes, there's a flex disk. Your driveshaft u-joints might be worn out if you're going through them fast without excessive abuse.
sorry, i have an E34 535i
=]
i do drive with a fair amount of abuse....
recently took it to englishtown drag strip
and most recently have been kicking in the clutch during 2nd
gear turns to get the back end to slide around =\
-
russc
- Posts: 1759
- Joined: Feb 12, 2006 12:00 PM
- Location: SF Bay Area, CA
-
Contact:
Post
by russc »
Yup,
That will abuse it...
RussC
-
m535is
- Posts: 1318
- Joined: Feb 12, 2006 12:00 PM
- Location: Greenville SC
-
Contact:
Post
by m535is »
Yeah, I have been thinking that it might be smart to look at making one out of delrin or something harder so it doesn't keep breaking.
-
bahnstormer
- Posts: 212
- Joined: Feb 12, 2006 12:00 PM
Post
by bahnstormer »
m535is wrote:Yeah, I have been thinking that it might be smart to look at making one out of delrin or something harder so it doesn't keep breaking.
but then wont other parts of the drivetrain take the hit?
flex disc is like 30 bucks if i remeber correctly?
-
russc
- Posts: 1759
- Joined: Feb 12, 2006 12:00 PM
- Location: SF Bay Area, CA
-
Contact:
Post
by russc »
And just like all the other hard bushings, increased noise.
RussC