What did you do to your other car(s) today?

General conversations about BMW E28s and the people who own them.
Das_Prachtstrasse
Posts: 5616
Joined: Sep 10, 2006 7:06 AM
Location: Melbourne, Doooown Under

Post by Das_Prachtstrasse »

Did some work on the rally car, got creative and installed a set of e36 328i shocks and springs in the rear, and chopped off the rear muffler. It's got nice ride height and ground clearance now, and is much firmer which is a huge improvement over the stock stuff. We'll still need new struts and springs in the front as the e36 stuff is not an easy retrofit and the front end is too soft, but the rear end is a huge improvement.
Image
cddallara
Posts: 3513
Joined: Apr 03, 2010 8:45 AM
Location: Lagunitas, Ca

Post by cddallara »

Bought m52 to replace the 5 cyl m50 in the touring. Maybe I'll finally swap in the 5 speed and rear end too...
rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

Changing the microfilter in my E90:

15 minutes: actually changing the filter
45 minutes: cleaning every surface under the hood on the way in and out

5 minutes: resetting the light
5 minutes: pondering if I was about to loose another coil
djazz
Posts: 2541
Joined: Feb 12, 2006 12:00 PM
Location: Foat Wuth, Texas

Post by djazz »

E36 Joy: Picked up a set of 15" style 41 wheels with 70% tread tires and new looking used front bilstein sports with springs for $250.

No idea what springs. (They are black with three red stripes down the coils. M3?) But for that price who cares.

Image

Image
Last edited by djazz on Dec 30, 2013 6:07 AM, edited 3 times in total.
cddallara
Posts: 3513
Joined: Apr 03, 2010 8:45 AM
Location: Lagunitas, Ca

Post by cddallara »

cddallara wrote:Bought m52 to replace the 5 cyl m50 in the touring. Maybe I'll finally swap in the 5 speed and rear end too...
Motor showed up yesterday. Going to be a long winter project, but should transform the ol' bag quite nicely.
a
Posts: 12473
Joined: Feb 12, 2006 12:00 PM
Location: Marshfield ,MA

Post by a »

I let the muffler mud cure over the weekend. Today, I made the rubbish run and the Rat is quiet. I'll try for a sticker Friday.
rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

On the 750iL- put the fully functioning factory radio back. Didn't test the tape deck. Needs new rear speakers. Pass door lock disassembled, loosened. Working properly again.
vinceg101
Posts: 4879
Joined: Jun 20, 2007 2:40 AM
Location: Los Angeles, CA

Post by vinceg101 »

E39 Baselining: Differential Fluid service

(Was going to do the Power Steering fluid & filter service, but ran out of daylight. Re-scheduled to next week.)
cvillebimmer
Posts: 2043
Joined: May 29, 2008 2:25 PM
Location: Charlottesville, VA

Post by cvillebimmer »

e31 - oil change & replace broken horns
e4dRanger - oil change, grease fittings and top fluids
e38 - (done last week) oil pan gasket, radiator/t-stat, re-clamp P/S hose, steering linkage and tie rod ends.

All cars legal and no drips, yay!
1st 5er
Posts: 21848
Joined: Jun 13, 2008 12:15 AM
Location: Cypress
Contact:

Post by 1st 5er »

rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

I spent the entire day driving in the snow today wishing I could trade my DTC for an LSD in my E90. Yes, i know you can retrofit an LSD in there but its probably not worth it to me.
oldskool
Posts: 12001
Joined: Jul 13, 2008 3:46 PM
Location: coastal north carolina
Contact:

Post by oldskool »

I am going to go change the oil and replace a headlight in the Landbruiser. Kinda dark and rainy out there and I've got to finish this Ballast Point "Victory at Sea" porter, maybe watch an episode of Breaking Bad. Probably lead to another porter. Probably nothing will get done. Nevermind.
cvillebimmer
Posts: 2043
Joined: May 29, 2008 2:25 PM
Location: Charlottesville, VA

Post by cvillebimmer »

Replaced the Forester's 9 month old Advance Auto Chinese made alternator with another re-man Chinese alternator. :roll:

At least it only takes 10 mins to swap out. Took me longer to reprogram the radio and clock.
rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

cvillebimmer wrote:Replaced the Forester's 9 month old Advance Auto Chinese made alternator with another re-man Chinese alternator. :roll:

At least it only takes 10 mins to swap out. Took me longer to reprogram the radio and clock.
Wow. Lack of QC.
oldskool
Posts: 12001
Joined: Jul 13, 2008 3:46 PM
Location: coastal north carolina
Contact:

Post by oldskool »

Success!! Drained out 5 quarts and then Truckasaurus took @8 quarts of Mobil1 5w30 syn, warmed first to room temperature and tasted for freshness, just for you oil Nazis.
I only quaffed 2 beers during the long afternoon, and sent 4 texts while underneath watching the oil drain.
Headlight bulb was warrantied so 2014 is looking pretty sweet so far.
Felt adventerous so I conditioner the leather. Found some money and some french fries. You know I ate them, they taste the same BTW.
rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

oldskool wrote:Success!! Drained out 5 quarts and then Truckasaurus took @8 quarts of Mobil1 5w30 syn, warmed first to room temperature and tasted for freshness, just for you oil Nazis.
I only quaffed 2 beers during the long afternoon, and sent 4 texts while underneath watching the oil drain.
Headlight bulb was warrantied so 2014 is looking pretty sweet so far.
Felt adventerous so I conditioner the leather. Found some money and some french fries. You know I ate them, they taste the same BTW.
The money or the fries?
rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

I went out and checked the specific gravity on the 750iL because I realized it was going to be -3 tonight. I might have frostbite on my left index finger but I know that antifreeze isn't going to freeze the block.
cddallara
Posts: 3513
Joined: Apr 03, 2010 8:45 AM
Location: Lagunitas, Ca

Post by cddallara »

cddallara wrote:
cddallara wrote:Bought m52 to replace the 5 cyl m50 in the touring. Maybe I'll finally swap in the 5 speed and rear end too...
Motor showed up yesterday. Going to be a long winter project, but should transform the ol' bag quite nicely.
Image
Mab1957
Posts: 2251
Joined: May 14, 2010 1:33 PM
Location: Northern Virginia, USA

Post by Mab1957 »

Installed Andy's MoBrighta bulb carrier on the e30 and swapped in a good reverse light switch.
Image
Image
I'll get a picture of the MoBrighta tail action when it is warmer. :D
Revive
Posts: 13
Joined: Sep 11, 2013 10:38 PM

Post by Revive »

Cut down a piece of wood for jacking blocks, then blew the sawdust off my Lexus. Then stared at it wishing it's not winter... :(
wkohler
Posts: 50924
Joined: Oct 05, 2006 11:04 PM
Location: Phönix, Arizona, USA
Contact:

Post by wkohler »

I hit my head so hard on the roof of the touring while getting in, my eyes hurt. H8 that piece of shit.
rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

wkohler wrote:I hit my head so hard on the roof of the touring while getting in, my eyes hurt. H8 that piece of shit.
Try cutting off the roof. That'll solve that problem. Like this guy did to his E28:

Image

I bet he'll do it for ya cheap.
davintosh
Posts: 13948
Joined: Jan 28, 2009 1:05 AM
Location: Sioux Falls, SD
Contact:

Post by davintosh »

The driver's side door lock mechanism has been terrible sticky in cold weather, and not letting the door shut until heat from the cabin loosens up the white lithium grease I used to lubricate it. Today I pulled the mech back out, hosed it down with some brake cleaner, then re-lubed it with some Tri-Flow. Works like it's s'posed to now. :up:

The next couple of days will be the real test though; tonight's low is expected to be -9°F, and tomorrow night's low -21°F.
rmiddendorf
Posts: 5568
Joined: Jul 11, 2010 1:17 PM
Location: Ohio
Contact:

Post by rmiddendorf »

davintosh wrote:The driver's side door lock mechanism has been terrible sticky in cold weather, and not letting the door shut until heat from the cabin loosens up the white lithium grease I used to lubricate it. Today I pulled the mech back out, hosed it down with some brake cleaner, then re-lubed it with some Tri-Flow. Works like it's s'posed to now. :up:

The next couple of days will be the real test though; tonight's low is expected to be -9°F, and tomorrow night's low -21°F.
We're looking at -15 Tuesday sometime. Check the specific gravity on those cars' coolant!
cvillebimmer
Posts: 2043
Joined: May 29, 2008 2:25 PM
Location: Charlottesville, VA

Post by cvillebimmer »

davintosh wrote:The driver's side door lock mechanism has been terrible sticky in cold weather, and not letting the door shut until heat from the cabin loosens up the white lithium grease I used to lubricate it. Today I pulled the mech back out, hosed it down with some brake cleaner, then re-lubed it with some Tri-Flow. Works like it's s'posed to now. :up:

The next couple of days will be the real test though; tonight's low is expected to be -9°F, and tomorrow night's low -21°F.
I need to do this to the e38. I had to bungee the passenger door shut in order to drive to work the other day. Was relieved when it started working again after it warmed up.
Post Reply