Anyone have a jimstim i could borrow?

[mitch5]

I finished building my ms2 v3 setup and have yet to get a vr signal. After replacing the whole vr circut i realized maybe my jim stim isnt working, sure enough it isnt sending a signal after i bypassed the vr circut and did the led test. If anyone has a jim stim unit i could borrow that would be a huge help. Ill pay shipping both ways, actually if a well known member on here wants to take a look at my ms and test it with a known unit im up for that.

[Brad D.]

I finished building my ms2 v3 setup and have yet to get a vr signal. After replacing the whole vr circut i realized maybe my jim stim isnt working, sure enough it isnt sending a signal after i bypassed the vr circut and did the led test. If anyone has a jim stim unit i could borrow that would be a huge help. Ill pay shipping both ways, actually if a well known member on here wants to take a look at my ms and test it with a known unit im up for that.

Not sure which one you have, but not all jimstims will simulate the VR signal correctly. You need a 1.5 with the wheel simulator. The original will not simulate the VR signal.

[mitch5]

Ya I have the Jim stim 1.5. I even set it to edis mode and by passed the circuit and got nothing. That and I'm getting whacky voltages everywhere. For example I get 3.87 volts coming from the Jim stim to my ms2. I get 5 volts at the pull up so somerhing is happening. From doing the rpm test in my jimstim it seems like the processor isn't working

[elcrazon]

I have a JimStim 1.5 that's known good and setup for 60-2 VR. PM me an address and I can ship it in the next day or two.