Remote mounting a fpr
-
- Beamter
- Posts: 9062
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Remote mounting a fpr
I want to keep the stock b35 fuel rail but need to remote mount the fpr. A few times I've seen a block off plate that places a nipple in the stock fpr location. This allows a hose to be ran a separate fpr. Does anyone know a vendor that sells this type of plate? Pretty old stuff and maybe hard to find.
Re: Remote mounting a fpr
I got one from Ireland Eng years ago.
-
- Beamter
- Posts: 9062
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Re: Remote mounting a fpr
Good call! Will ping them.George wrote:I got one from Ireland Eng years ago.
-
- Beamter
- Posts: 23035
- Joined: Apr 08, 2009 10:30 PM
- Location: Charlottesville, VA
- Contact:
Re: Remote mounting a fpr
If you can't find anything LMK.
-
- Posts: 17638
- Joined: Feb 12, 2006 12:00 PM
- Location: Nasty Orleans------> Batten-Rooehjch------>More Souther LA
Re: Remote mounting a fpr
There is a nice looking one currently FS on the FB E28 Group page.
-
- Beamter
- Posts: 9062
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Re: Remote mounting a fpr
BOOM!!!!Kyle in NO wrote:There is a nice looking one currently FS on the FB E28 Group page.
-
- Posts: 315
- Joined: May 26, 2013 3:24 AM
- Location: Fayetteville, Ga
Re: Remote mounting a fpr
Why wouldn't you just use a BELL ENGINERRING fuel pressure regulator which just ties into the return line of your stock regulator. I think the regulators can be bought now at gmax performance.
-
- Beamter
- Posts: 9062
- Joined: Apr 13, 2006 11:18 PM
- Location: Council Bluffs, IA
- Contact:
Re: Remote mounting a fpr
I can't run the stock fpr (mounted in the forward position) under the e12 intake due to clearance issues. Plan was to remote mount an aftermarket regulator. This should work no?5timesturbo wrote:Why wouldn't you just use a BELL ENGINERRING fuel pressure regulator which just ties into the return line of your stock regulator. I think the regulators can be bought now at gmax performance.
Re: Remote mounting a fpr
Motornic 1.0 Non-Adaptive Parts by samleisey, on Flickr
This is a regulator and rail on a 011 Ecu 1982 635csi, this could easily be made into a remote mount regulator?
This is a regulator and rail on a 011 Ecu 1982 635csi, this could easily be made into a remote mount regulator?
-
- Posts: 315
- Joined: May 26, 2013 3:24 AM
- Location: Fayetteville, Ga
Re: Remote mounting a fpr
looks good