Remote mounting a fpr

[Nebraska_e28]

I want to keep the stock b35 fuel rail but need to remote mount the fpr. A few times I've seen a block off plate that places a nipple in the stock fpr location. This allows a hose to be ran a separate fpr. Does anyone know a vendor that sells this type of plate? Pretty old stuff and maybe hard to find.

[George]

I got one from Ireland Eng years ago.

[Nebraska_e28]

I got one from Ireland Eng years ago.

Good call! Will ping them.

[mooseheadm5]

If you can't find anything LMK.

[Kyle in NO]

There is a nice looking one currently FS on the FB E28 Group page.

[Nebraska_e28]

There is a nice looking one currently FS on the FB E28 Group page.

BOOM!!!!

[5timesturbo]

Why wouldn't you just use a BELL ENGINERRING fuel pressure regulator which just ties into the return line of your stock regulator. I think the regulators can be bought now at gmax performance.

[Nebraska_e28]

Why wouldn't you just use a BELL ENGINERRING fuel pressure regulator which just ties into the return line of your stock regulator. I think the regulators can be bought now at gmax performance.

I can't run the stock fpr (mounted in the forward position) under the e12 intake due to clearance issues. Plan was to remote mount an aftermarket regulator. This should work no?

[LeiseyJr]

Motornic 1.0 Non-Adaptive Parts by samleisey, on Flickr

This is a regulator and rail on a 011 Ecu 1982 635csi, this could easily be made into a remote mount regulator?

[5timesturbo]

looks good