External links now open in a new browser tab - turn this off in your UCP - Read more here.

Megasquirt Finished

Discussion pertaining to positive pressure E28s.
Post Reply
RDAvena
Posts: 514
Joined: Feb 12, 2006 12:00 PM
Location: Falcon, CO

Megasquirt Finished

Post by RDAvena »

Ordered the kit, built it, had to troubleshoot a bit, modified the B35 in the car by adding the necessary 60-2 wheel, RF sensor, TPS etc., reworked the harness, and it started up first try.

Got back from TX and spent the morning tuning the car. It runs a lot stronger than it ever did with the Motronic stuff. The 745i ecu, the 059 and 061 ecus. Plus the AFM replacement thing from Split Second. This was with the B35 head and pistons, 3inch exhaust, etc.

The 6psi now is way different than the 6psi it had before. Impressive for a D. I. Y. kit.
M635CSi
Posts: 1587
Joined: Apr 09, 2006 6:25 PM
Location: .From Sea to Shining Sea

Post by M635CSi »

Congrats!
DMNaskale
Posts: 1686
Joined: Feb 12, 2006 12:00 PM
Location: Tampa Bay USA

Post by DMNaskale »

Congratulations, job well done. Starting on the first try is a great feeling after a big project comes together.

What version of MS did you go with? Any details you can provide will be of great interest.
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Post by T_C_D »

Congrats Ray. Thought you sold the car to Shifty?
RDAvena
Posts: 514
Joined: Feb 12, 2006 12:00 PM
Location: Falcon, CO

Post by RDAvena »

Thanks,

It "started" on the first try but tuning it took another couple hours :D But it was good to learn how to tune it.

The Megasquirt I used was MS2 with the Version 3 board. I had read about the MS1 on the V3 board that all of the e30 guys are running but decided that the "extra" part will catch up soon enough to the MS2. "Extra" for them are the other mods that have made it to the MS1 unit: Distributorless wasted spark, Boost control, fan controls, water injection, Tach output, etc.

I currently have an MSD box and coil running the ignition and I have not had any problems. I even hooked up the Blaster coil directly to the MS unit and it sparked fine. You can even connect the stock BMW coil to the MS and it will spark. Advance and dwell are controlled in the MS unit.

The only non-BMW sensor I used was the GM Intake air temp sensor. Everything else is a BMW part. I was able to graft the pigtail MS wiring harness to the BMW engine harness without an issue. I retained the connections to the fusebox , the Main and fuel pump relay. Very simple. The only bad part is that the BMW TPS is noisy and it did take a little extra tuning to keep the accel enrich code in MS from kicking in. This or I have a faulty TPS.

Also if you are going to build it yourself invest in a good soldering iron, solder and plenty of soldering wick.
RDAvena
Posts: 514
Joined: Feb 12, 2006 12:00 PM
Location: Falcon, CO

Post by RDAvena »

T_C_D wrote:Congrats Ray. Thought you sold the car to Shifty?
We talked and almost closed the deal then the MS kit came in and the urge to tinker could not be resisted.

The car that was pissing me off before is now on it's second honeymoon.
DMNaskale
Posts: 1686
Joined: Feb 12, 2006 12:00 PM
Location: Tampa Bay USA

Post by DMNaskale »

Thanks for the info, another question: are you using the v2.687 code? Thanks!
RDAvena
Posts: 514
Joined: Feb 12, 2006 12:00 PM
Location: Falcon, CO

Post by RDAvena »

DMNaskale wrote:Thanks for the info, another question: are you using the v2.687 code? Thanks!
Yep the latest code..
Jimmie G
Posts: 452
Joined: Feb 12, 2006 12:00 PM

Post by Jimmie G »

Do you have the 745 manifold and turbo on it.

Jimmie
RDAvena
Posts: 514
Joined: Feb 12, 2006 12:00 PM
Location: Falcon, CO

Post by RDAvena »

yes I do.
Jimmie G
Posts: 452
Joined: Feb 12, 2006 12:00 PM

Post by Jimmie G »

would you want to sell the 013 if you still have it? A good freind of mine is looking for one.

Jimmie
altus22
Posts: 621
Joined: Feb 12, 2006 12:00 PM
Location: Norfolk, VA

Post by altus22 »

Excellent! It doesn't sound like it was hard for you. Have you soldered something like this before? Glad to hear it's running better than Motronic. Good luck.
Post Reply