I think I'm going to sell the S2

Discussion pertaining to positive pressure E28s.
Post Reply
Bill in MN
Posts: 1718
Joined: Feb 12, 2006 12:00 PM
Location: The Boonies, Mn
Contact:

I think I'm going to sell the S2

Post by Bill in MN »

Life has gotten pretty nuts over the past year, the time I have to devote to old cars has been dramatically decreased and I am spread too thin.

The car is not a show car by any means but is still a very clean example. I condiser it a daily driver and it is treated as such. It's no garage queen, has a few nicks here and there and while very nice it is not perfect.

This is a partial list of what's been done and I will probably forget a few things:

TCD S2 and related gear
MSD ignition (haven't gone MS yet....no time to put in)
b34 bottom end
b35 top end
MLS hg/ARP studs
fresh head/valve job
JE forged pistons
Auto trans (don't laugh, it hauls ass)
revaned converter
3.73 LSD
"1 piece" drive shaft
Grunt bushings all around
camber adjustable rear bushings
solid rear sub frame bushings
Bilstein sports/HR's
big honking sways on both ends, beefed up mounts
M5 steering box
Euro body conversion ......complete and done right.
E21 Recaro's
big brakes on both ends
tower braces front/rear

It's set at 12 psi right now. My wife drives it and has a heavier foot than I so I pulled it down. It's astonishingly fast even at that level so I've left it there. It handles quite well too.

As with any car there are issues and I can provide anyone with the list. It's not long and none are life threatening. The car is pretty well sorted out and is a reliable DD. It is a car that I love to tinker with but I don't have the time to do it justice and that's why I'm considering selling it.
Image

If anyone is seriously interested, PM me. This is not a "must sell" situation so it's not going to be a giveaway. It is a very nice, extremely fast car for someone willing/able to keep it up the way it needs to be.
stuartinmn
Posts: 9478
Joined: Feb 12, 2006 12:00 PM
Location: Minneapolis

Post by stuartinmn »

Bill, if you sell that thing you know you'll just run out and buy something else to spend all your time on.... ;)

Guys, I've ridden in this car - it's very nicely done and it's scary fast.
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Post by T_C_D »

Sell the Baur.
Duke
Posts: 9986
Joined: Feb 12, 2006 12:00 PM
Location: Ormond Beach, FL

Post by Duke »

I'll buy your drive shaft!! ;)
shifty
Posts: 2552
Joined: Feb 12, 2006 12:00 PM
Location: Greenville, SC
Contact:

Post by shifty »

I think I know what you need, Bill: a second red car. How about an '87 535iS/A with 130,000 miles? Red over Black, 3.91 LS, Mark D chip, red powdercoated E32 brakes, and soon to have a B&B Tri-Flo.

It's a great example of a mostly stock 535iS.

I'll tradeja straight up! :banana:
vance
Posts: 1576
Joined: Aug 26, 2006 11:22 PM
Location: Home of 5erFest 2009

Car for sale

Post by vance »

Hey Bill, I'm not exactly in the market for a car right now, cause I'm in the house market at the moment, but I might be for yours. What type money are you looking for and how quickly are you wanting to move it? Thanks.

Vance
Rich in Tupelo
Posts: 2917
Joined: Feb 12, 2006 12:00 PM
Location: Spring Hill, TN

Post by Rich in Tupelo »

cause I'm in the house market at the moment
Really! I might know a lovely place over in the Winfield area with a vacant lot behind it (for building a shop) that could be yours for the right price.
vance
Posts: 1576
Joined: Aug 26, 2006 11:22 PM
Location: Home of 5erFest 2009

Post by vance »

Rich in Tupelo wrote:
cause I'm in the house market at the moment
Really! I might know a lovely place over in the Winfield area with a vacant lot behind it (for building a shop) that could be yours for the right price.
Ulterior motive? :rofl:

Vance
Bill in MN
Posts: 1718
Joined: Feb 12, 2006 12:00 PM
Location: The Boonies, Mn
Contact:

Post by Bill in MN »

I don't know that I'll replace it with anything that's going to be a project. My wife has taken over the Baur and under no uncertain terms am I allowed to sell it. It's a 4 wheeled crotch rocket now and I have to admit it's a blast to drive a 2200lb car with a couple hundred high revving ponies under the hood.

As to value, I honestly have no idea. I know what I put into it but that is pretty much irrelevant to what it's really worth. I'm working on assessing a dollar figure to it.

As to being in a hurry to sell it, I'm not. I just know that my time is going to become even more fragmented and the S2 will have to go to the bottom of the list. I can always build another one when time permits.
Maddog
Posts: 191
Joined: Feb 12, 2006 12:00 PM
Location: Atlanta, GA

Post by Maddog »

Do you have any vibration in your driveshaft? How fast have you driven the car (top speed)?
Bill in MN
Posts: 1718
Joined: Feb 12, 2006 12:00 PM
Location: The Boonies, Mn
Contact:

.

Post by Bill in MN »

Maddog wrote:Do you have any vibration in your driveshaft? How fast have you driven the car (top speed)?
I let off at around 150. There was more there but I had no intention of finding out how much!

I haven't done any top speed runs with the 1 piece shaft installed. I got it out of my system early on and I rarely go much over 100 these days. 0 to 100 is an outright blast and that's enough. Too much to lose and the desire to stay living for a while longer dictated this fact
Maddog
Posts: 191
Joined: Feb 12, 2006 12:00 PM
Location: Atlanta, GA

Post by Maddog »

I'm just wondering how fast you can run with that one peice driveshaft before you reach the critical speed of the shaft.
Post Reply