Wanted: E28 Euro Headlights, Buckets, and Grills
Wanted: E28 Euro Headlights, Buckets, and Grills
I have a 1988 535is, and am looking for a complete set of Euro headlights for my car, but I am having a lot of trouble finding a set. If any of you have a set, or know where to get a set, please let me know.
Oh, my car has a set of 18x9" Mille Miglia wheels on it with 245/30/18 tires, and they are arduously working at destroying my suspension, fenderwells, and gas mileage. I am looking at a set of ASA AR2 wheels that are 17x8" with 215/45/17 tires, and I was wondering if I would run into any problems with that wheel/tire combo. Any input is greatly appreciated.
Oh, my car has a set of 18x9" Mille Miglia wheels on it with 245/30/18 tires, and they are arduously working at destroying my suspension, fenderwells, and gas mileage. I am looking at a set of ASA AR2 wheels that are 17x8" with 215/45/17 tires, and I was wondering if I would run into any problems with that wheel/tire combo. Any input is greatly appreciated.
-
- Posts: 17638
- Joined: Feb 12, 2006 12:00 PM
- Location: Nasty Orleans------> Batten-Rooehjch------>More Souther LA
I know, I had a wheel off while doing some work on my brakes (ABS sensor), and the lower part of my struts, the metal sleeve that the springs seat into, to be precise, were bent flat from the wheels rubbing them, and my rear wheels rub under heavy acceleration or when I go through dips at a local section of road that I like to play around inKyle in NO wrote:Jeezus, 18x9 wheels with 245 tires? Amazing you can even drive on it like that! You should run into no problems with the new setup you are describing...
-
- Posts: 10719
- Joined: Feb 12, 2006 12:00 PM
- Location: CHI, IL
ASA AR2s are heavy no matter what size. Those suckers will make the car ride like crap, even in 17" sizes. If you must have large wheels (larger than 16s), pony up the money for some lightweight BBS RKs or the like.
I just switched from my 16x8, forged E38 wheels with 225/50-16 S-03s to my 15x7 cheapie alloys and 205 snows ... every winter, I'm pleasantly surprised at how much better the ride gets and how much nimbler the steering feels. Overall grip is down, of course. I like the look and traction of the wider wheels enough to put up with the downgrade in ride, but the car is certainly enjoyable on smaller wheels.
-tammer
I just switched from my 16x8, forged E38 wheels with 225/50-16 S-03s to my 15x7 cheapie alloys and 205 snows ... every winter, I'm pleasantly surprised at how much better the ride gets and how much nimbler the steering feels. Overall grip is down, of course. I like the look and traction of the wider wheels enough to put up with the downgrade in ride, but the car is certainly enjoyable on smaller wheels.
-tammer
-
- Posts: 17638
- Joined: Feb 12, 2006 12:00 PM
- Location: Nasty Orleans------> Batten-Rooehjch------>More Souther LA
-
- Posts: 17638
- Joined: Feb 12, 2006 12:00 PM
- Location: Nasty Orleans------> Batten-Rooehjch------>More Souther LA
Well, I could make up some kind of elaborate rationale as to exactly why I want 17's, but what it comes down to is that I am a "kid", and I prefer the look of 17's over 16's, but I'm not a complete idiot like the guy before me who wedged the 18x9's on it.
So, aside from being heavy (which the Mille's are), how would you guys rate the ASA's?
So, aside from being heavy (which the Mille's are), how would you guys rate the ASA's?
I have a set complete with grilles, but they're rhd and in the UK so you'd have to pay shipping. I'd throw in a set of headlamp converters (not this particular set but one that would fit). Price (not including shipping) £50/$100.
The high beams are the same for both because the beams point straight ahead. The low beams for rhd point down to the left whereas lhd point down and to the right.CSDigg wrote:What is the difference between headlights for right and left-hand drive headlights, and what are the converters for?
The converters remove that part of the beam that would dazzle oncoming drivers when driving on the "wrong" side of the road, leaving enough of the beam for safe driving. They're used in the UK by drivers travelling to the European mainland. Of course it isn't as good as the right one but it's ok.
-
- Posts: 10719
- Joined: Feb 12, 2006 12:00 PM
- Location: CHI, IL
The low beams point UP and to the left on a RHD car, to illuminate road signs. They point up and right on a LHD car. UK/Japan/Australia market lamps will blind oncoming drivers in the US.
For the price of a set of new ASAs, you can get a used set of 16s from an E38 with tires, probably. Then save up for a nice set of 17s, and you'll be able to sell the E38 wheels for as much as you paid for them as long as you keep them off the curbs. Seriously, I'm talking 4 good wheels for under $200 (if you are patient with eBay), and they'll fit right, look good, and ride well. If you still have the jonesing for the 17s, then do it a little later when you wear out the 16" tires. That's the quick/easy/cheap way to get off the 18s.
-tammer
For the price of a set of new ASAs, you can get a used set of 16s from an E38 with tires, probably. Then save up for a nice set of 17s, and you'll be able to sell the E38 wheels for as much as you paid for them as long as you keep them off the curbs. Seriously, I'm talking 4 good wheels for under $200 (if you are patient with eBay), and they'll fit right, look good, and ride well. If you still have the jonesing for the 17s, then do it a little later when you wear out the 16" tires. That's the quick/easy/cheap way to get off the 18s.
-tammer
I stand corrected. For RHD lights, there is a 15 degree wedge of light above the horizontal (the'Kick up') towards the left, however the main body of the beam will be down (as compared to the high beam)...Tammer in Philly wrote:The low beams point UP and to the left on a RHD car, to illuminate road signs. They point up and right on a LHD car. UK/Japan/Australia market lamps will blind oncoming drivers in the US.
-tammer
This would blind drivers UNLESS the headlights were fitted with a converter mask which removes the beam 'kick-up'. A headlamp altered in this way will have a straight line as the top of the beam image. With the commercially produced kits the light output is not unduly reduced.