My turbo has a 3/4" return hole and a ~5/16" feed line. I was thinking 12AN and 4AN lines. Sound right?
And what size taps will I use on the pan and housing?
External links now open in a new browser tab - turn this off in your UCP - Read more here.
oil lines
I used -4 on my supply line and tapped the oil filter housing. On the turbo I used a -4AN billet adapter from Function7. I used ShawnD's website as reference for drilling the oil filter housing. As for my turbo drain, I used an adapter which was threaded for 1/2" NPT. I also tapped my oil pan 1/2" NPT (it needs a 45/64" drill) and used some quaility SS Swagelok fittings for the line. -12AN is very large but would work well and -10 would probably work. Mine is only 1/2" SS tubing and I have no issues with oil drainback. What size hole to drill will be determined by what fittings you choose to go with.
![Image](https://mye28.z13.web.core.windows.net/external/5ca43480f9152f92c0218e2ed792ebbe.jpg)
![Image](https://mye28.z13.web.core.windows.net/external/abebdd1c0aa39201bd61516c733d3c3f.jpg)
![Image](https://mye28.z13.web.core.windows.net/external/6a7c4727db3f640467920c17e7a115f5.jpg)
![Image](https://mye28.z13.web.core.windows.net/external/5ca43480f9152f92c0218e2ed792ebbe.jpg)
![Image](https://mye28.z13.web.core.windows.net/external/abebdd1c0aa39201bd61516c733d3c3f.jpg)
![Image](https://mye28.z13.web.core.windows.net/external/6a7c4727db3f640467920c17e7a115f5.jpg)