What did you do to your E28 today?

blkbmw · Post by **blkbmw** » Oct 11, 2009 11:45 AM

Not much, its been sitting in the garage for the past 2 month, i think i'll take it out sometime next week and then do an oil change......

KillerPM · Post by **KillerPM** » Oct 11, 2009 12:00 PM

A better story is what I did to Ted's E28 last weekend..

Still waiting for those pictures.

Let me just say working on a Dirty Euro M30 has its additional challenges. Stupid oil cooler always getting in the way.

frink84 · Post by **frink84** » Oct 11, 2009 1:43 PM

put in a power front seat, matching passenger headrest (old one was from an e30), driver side door pull that wasnt broken, center vent w/ open/close feature, left rear US bumper covering. all thanks to mr. ronp!

Xenocide · Post by **Xenocide** » Oct 11, 2009 2:12 PM

Abused the fuel injectors again, trying to get the flyback circuit to work on megasquirt

C.R. Krieger · Post by **C.R. Krieger** » Oct 11, 2009 5:47 PM

Rolled out at oh-dark-thirty to Badger Bimmers' OktoberFAST at Road America. Got snowed on. Got cold. Had a nice dinner with good friends. Went home.

a · Post by a » Oct 11, 2009 7:17 PM

Follow up, I did a pre- reinspection light check . 2 side marker lights were bad, so I replaced them. All other lights appear OK . BB Shiftless is gonna need SF bushings by spring.
'Twas a pint low in ATF, making it shift funny when cold. Aired up tires , but the swoopy rear end just gots to be SF bushings.

Paul in N FL · Post by **Paul in N FL** » Oct 11, 2009 8:17 PM

Looked at it in the driveway waiting to be towed to the shop in a day or two for a valve job, new water pump, and thrust and control arms, alongg with tie rod ends...

shagrath · Post by **shagrath** » Oct 11, 2009 8:45 PM

Went on a local BMW outing and meet today and discovered that my water pump gasket is toast.

Pissed.

Bimmerguy2002 · Post by **Bimmerguy2002** » Oct 11, 2009 9:21 PM

I adjusted my poor b35s valves to .010" and dumped a bunch of marvel mystery oil into the crankcase for no apparent reason.

vinceg101 · Post by **vinceg101** » Oct 11, 2009 10:17 PM

Getting ready for the SoCal Vintage BMW Show in 2 weeks so I was busy both Saturday and Sunday:

1. Finished installing the new Fuel Injectors. Had only one left because one of the new ones had a bad O-ring (which is kind of ironic considering that was why I was replacing them in the first place). But I upgraded to the newer style with the 4 nozzles.
Here's a shot of the old set; all 6 looked this way. Kind of mucked up, huh? (Off to Cruzin' they go; anybody need a set of re-manufactured Injectors?)

2. Ignition and Vacuum Lines: New set of Ignition Wires from BMP and new Vacuum hoses (I like the blue accent). Also a general engine detailing and re-paint of the air box. There's still a bit of dirt in there, but a real wash detail comes next week.

fxe28 · Post by **fxe28** » Oct 11, 2009 10:26 PM

Spent about 8 hrs repairing the rusted out rear valance. Still not finished.

RVigre · Post by **RVigre** » Oct 12, 2009 12:02 AM

Installed new steering wheel. Spent about 2 hours washing and detailing. Then parked it in the shade for the rest of the day as its's still way hot here in Florida........I really ought to clean out my garage.....

bwenham · Post by **bwenham** » Oct 12, 2009 1:05 AM

drove my 528e to class and pondered installing the flip out screen dvd deck sitting in my closet. it would be nice to at least have a cd player...sigh.

duggi · Post by **duggi** » Oct 12, 2009 1:06 AM

Today, I put in a rear shelf with the built-in sunshade, replaced the oil pressure sender and put in a new fuse box lid =)

EZE84WIP · Post by **EZE84WIP** » Oct 12, 2009 12:47 PM

Finish a little bit of wet sanding so I can lay down a coat of clear on a few sections of the car & sand down the hood and apply another coat of paint.

Thinking about starting work on the rear end body work...ugh

Post by **Brad D.** » Oct 12, 2009 3:25 PM

Drove it to work.

alijonny · Post by **alijonny** » Oct 12, 2009 4:07 PM

looked at it. shed a tear. hopped in my 745i and drove it.

slammin_e28 · Post by **slammin_e28** » Oct 12, 2009 4:14 PM

alijonny wrote:looked at it. shed a tear. hopped in my 745i and drove it.

Same here, but I hopped in the 330i and drove it. One day, I tell myself, one day I'll drive the e28 again....

davintosh · Post by **davintosh** » Oct 12, 2009 4:20 PM

Brushed the snow off it this morning

and drove it to work. Went home for lunch & answered the door for the UPS guy who had a package from Autohaus AZ containing a shiny new front wheel bearing for the 735

and some replacement intake boots/hoses for both cars.

Had the intake boot for the 735 sitting next to the same for the 528 and was amazed at the size difference!

Then I went out to the store where I'd earlier seen a set of large-size metric sockets for $55, and they were sold out. So tonight I get to do the drivearound again to see if I can buy or borrow a 46mm socket and breaker bar to get that wheel bearing nut off the seven.

I have half a mind to just stop by the repair shop & ask them how much they'd charge to change it for me.

wkohler · Post by **wkohler** » Oct 12, 2009 5:19 PM

Drove it to the yard. Put a G265 in the trunk with shifter-console, bellhousing, inspection cover and the driveshaft. Drove it home. Parked it on the street.

Das_Prachtstrasse · Post by **Das_Prachtstrasse** » Oct 12, 2009 6:32 PM

Built a roofrack for it. Put my Alpinas on it and did burnouts to use up the old tyres that are on them. Drove it to the kebab van, drove it home and put it in the garage.

Post by **Brad D.** » Oct 12, 2009 7:36 PM

wkohler wrote:Drove it to the yard. Put a G265 in the trunk with shifter-console, bellhousing, inspection cover and the driveshaft. Drove it home. Parked it on the street.

Nice score.

1st 5er · Post by **1st 5er** » Oct 12, 2009 8:47 PM

Put about 65 miles on it driving it for work. This is the 528eA.

Xenocide · Post by **Xenocide** » Oct 13, 2009 9:06 AM

GOT MY MEGASQUIRT PROBLEMS FIGURED OUT!!

Now I gotta put it in and see if it works.

davintosh · Post by **davintosh** » Oct 13, 2009 3:00 PM

I think I finally figured out my screwy idle problem on the 528... Last night I replaced the cracked intake boot and the hoses from the intake to the idle control valve and to the valve cover, but it was still revving up & down between 1500 and 800. Gave the ICV one more good cleaning, shot some WD-40 in it and left it sit overnight, and it was much better this morning. Still not perfect though, so I may need to replace the ICV, but I'm closing in on it!

MyE28.com

MyE28.com

What did you do to your E28 today?