Moosehead Eng. UCABs have arrived! 2/2/11 (grp. buy closed)

Post by **mooseheadm5** » Nov 09, 2010 6:27 PM

warezdog wrote:When should we expect to pay the other half?
Just trying to budget!

Thanks

Like last time, I will have everyone pay the second half once I receive word that they have shipped to me from the manufacturer. It was only supposed to take a few weeks last time, but they got behind. Now with their busy season over, I am hoping it will be in about 3 weeks. I know this didn't turn out the be the best timing due to Xmas, but if anyone is having specific issues I can hold your order if you contact me.

IRideFixed · Post by **IRideFixed** » Nov 09, 2010 9:13 PM

now the question is... can i tolerate the exceedingly annoying high speed brake shudder

ealinn · Post by **ealinn** » Nov 25, 2010 10:32 PM

Hey Paul, any developments on the LCAB's? I'd like to have these complementing the UCAB's when the car makes it out in the spring.

Frybrid 524td · Post by **Frybrid 524td** » Nov 26, 2010 9:48 AM

ealinn wrote:Hey Paul, any developments on the LCAB's? I'd like to have these complementing the UCAB's when the car makes it out in the spring.

x2

Post by **mooseheadm5** » Dec 22, 2010 11:30 PM

I apologize for the delays, but they have finally made the shells and the balls. They are shipping me everything I need for the bushings except the balls, which still need to be sent out for plating. As soon as I have the shells in my hand, I'll contact everyone to settle up.

Thanks for your patience!

As for LCABs, I will be experimenting on those next week while I am off of work.

ElGuappo · Post by **ElGuappo** » Dec 23, 2010 11:59 AM

huh huh...

You said balls....

huh huh...

clevertd · Post by **clevertd** » Dec 27, 2010 12:30 AM

Still a chance to get in on these?

Post by **mooseheadm5** » Dec 27, 2010 12:32 AM

Hell, why not. It is Christmas. Follow the instructions in the first post.

Corner Carver · Post by **Corner Carver** » Dec 27, 2010 10:49 AM

Whooohooo! Can't wait for my second pair

Here is my first pair and the POS's that they replaced.

Installed! Very Seksy!!

Playing with them the day after Thanksgiving. Mmmmm..... Crispy precise steering

Thanks Paul!

EuroShark · Post by **EuroShark** » Dec 27, 2010 10:59 AM

I'd like to get in on this too if I still can. Do you want 50% now as per the original post, or should I send the whole amount? I want the Silver kit.

Post by **mooseheadm5** » Dec 27, 2010 11:18 AM

You can do either. I will contact everyone for their balance as soon as I have a concrete ship date.

EuroShark · Post by **EuroShark** » Dec 27, 2010 11:30 AM

Excellent. Just sent my deposit.

BigKriss · Post by **BigKriss** » Dec 28, 2010 8:09 AM

Is it too late to get on this deal? Will you ship to Sydney, Australia via USPS?

Post by **mooseheadm5** » Dec 29, 2010 12:01 AM

BigKriss wrote:Is it too late to get on this deal? Will you ship to Sydney, Australia via USPS?

Tentatively I am going to let you in on the deal, but I first have to make sure I have enough coming. Let me get back to you on that when I have a chance to check things out tomorrow.

BigKriss · Post by **BigKriss** » Dec 30, 2010 5:26 AM

no worries if you can't mate. I'll wait for your reply.

mooseheadm5 wrote:
BigKriss wrote:Is it too late to get on this deal? Will you ship to Sydney, Australia via USPS?
Tentatively I am going to let you in on the deal, but I first have to make sure I have enough coming. Let me get back to you on that when I have a chance to check things out tomorrow.

warezdog · Post by **warezdog** » Jan 02, 2011 8:47 PM

Mmmmm goodies coming soon!

GGray · Post by **GGray** » Jan 04, 2011 6:10 PM

Are these only available through group buys?

Post by **mooseheadm5** » Jan 10, 2011 12:17 AM

GGray wrote:Are these only available through group buys?

At the moment, yes. I have to order them in large quantities and can't afford to sit on 30 pairs of them at a time right now.

As of right now if everyone that has contacted me completes their transactions, I have 3 sets left. After that I will be buying the next set outright and selling them on the website at a slightly higher price.

Get them while you can.

Post by **mooseheadm5** » Jan 10, 2011 9:18 AM

Just to clarify, everyone that has paid a deposit has their set accounted for. Few people have contacted me but not paid. If they decide to buy I only have 3 sets left.

They still have not shown up yet, but once I am ready to ship I will contact everyone for their balance payment and to confirm their order and shipping address.

Thanks!

warezdog · Post by **warezdog** » Jan 10, 2011 9:20 AM

WOOOHOOOO!! GOODIES ON THE WAY!!

warezdog · Post by **warezdog** » Jan 13, 2011 7:07 PM

I get paid tomorrow, can I just take care of the balance before I'm broke again?

Post by **mooseheadm5** » Jan 13, 2011 7:19 PM

You are welcome to do so

Still waiting to hear when the rest of the parts will be here.

Thanks for being patient, guys!

Post by **mooseheadm5** » Jan 22, 2011 9:53 AM

The rest of the parts are on the way

I only have a couple of pairs left for sale.

Machtig · Post by **Machtig** » Jan 22, 2011 12:41 PM

Paul, how much for a platinum set for my M5? Good quality arms (whatever that may be).

Post by **mooseheadm5** » Jan 22, 2011 1:09 PM

Platinum kit with no spares, Lemfoerder arms - $375 shipped
Platinum kit with spare races, tool, and high temp grease, Lemfoerder arms - $415 shipped

PROJECT. E28 · Post by **PROJECT. E28** » Jan 22, 2011 1:27 PM

hey moosehead, im very interested in your product. Im gonna be saving up to get your upper and lower control arm set up. I will also be wanting them pressed into new arms so all i would have to do is install the arms. If i supply the arms, how much would it cost me for the upper and lower control arms? It makes more sense to get these because the rubber ones just cant compare as far as lifespan for these. Please let me know, i can wait for your next shipment, im not in to big of a hurry cause of my lack of funds, but with my birthday and taxes coming up, ill have some

THank you

Post by **mooseheadm5** » Jan 22, 2011 1:28 PM

Once I work out whether the lower joints will be possible/affordable, I'll let you know.

PROJECT. E28 · Post by **PROJECT. E28** » Jan 22, 2011 1:30 PM

mooseheadm5 wrote:Once I work out whether the lower joints will be possible/affordable, I'll let you know.

ok, thank you. As far as the lowers go, how much am i looking? really the lowers go bad more often am i correct?

Post by **mooseheadm5** » Jan 22, 2011 1:32 PM

The lower bushings don't go bad before the ball joints. You would only gain improved suspension action and steering feel. The uppers are the ones that crap out quickly.

PROJECT. E28 · Post by **PROJECT. E28** » Jan 22, 2011 1:35 PM

dang, yeah cause when im on the freeway and taking right hand turns, the wheel starts really shaking, but not so much when im going straight and not at all in left turns. What would you say that could be from?

MyE28.com

MyE28.com

Moosehead Eng. UCABs have arrived! 2/2/11 (grp. buy closed)