I bought this head from Todd at TCD about a month ago and have since found another option for my project. This is a fresh head with 0 miles and is still packaged as I received it from TCD. $500 shipped to the lower 48. I can also deliver to Vintage.
Todd,
I have to get down and see the E30 project one of these weekends. I take it you finally found the white E30 you were looking for...see you at the Vintage
Finally found the right e30: alpineweiss with blue cloth. It is a US model that was purchased and used in Germany for a few months prior to transport here. Now I need to get busy.
No; I do not. But I did provide the link to the original ad as was posted by TCD which did include pics. As I mentioned, it is still boxed as received from TCD.
This is probably a dumb question that I'm going to get reamed for, but is this just an ordinary head, or did they setup for a turbo application? Not that I know what they would do differently, but since I'm the only one expressing interest so far, figured I'd ask.
It is basically a stock head for the m30b35 that was rebuilt with new components. The cam is a desirable factory cam and the head is suitable for turbo use. If you use this on a stock m30b34, you will lower your compression (possible benefit for turbo) gain better cam, have larger valves but you might want to use the b35 manifolds as well.
