FUBAR 528e, Gauging Condition of the M90

Post your photos and videos here!
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR daily M30 528e 7/27 Koni Race Insert V.2

Post by LeiseyJr »

So after the first front Koni Race Insert, we took away some changes that needed to be made. First the collar nut needed to be machined right so the strut didn't blow. It also needed a softer bumpstop, and trimming it was not a good idea. So this time around we fixed that. Very pleased so far. Rides much better and feels like my friends Ground Control Equipped E36. So super happy about this so far.


Image359D6131-5682-4B22-AA02-0D1AE6977589 by samleisey, on Flickr
ImageIMG_5604 by samleisey, on Flickr
ImageIMG_5646 by samleisey, on Flickr

I took it on the bumpiest most pot hole filled back road I know. It did fantastic, car didn't get upset. My girlfriend filming bouncing around on the worn comfort seat springs she was a bit upset.
https://www.youtube.com/watch?v=qmryWXpQDF8
https://www.youtube.com/watch?v=nY6ioWdoJdw


At this point, I have probably spent more then just buying Ground Control and being done with it. However what is the fun in that?


ImageIMG_5687 by samleisey, on FlickrImageIMG_5688 by samleisey, on Flickr
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR "roadkill" M30 528e 10/13 Track Day Bro

Post by LeiseyJr »

https://www.youtube.com/watch?v=VSQweFXmfBs&t=59s

Should be a bigger update soon when my 35mm pics get developed on Tex Fest/other roadtrip.
Bonsaibacker
Posts: 967
Joined: Oct 26, 2017 3:36 PM
Location: Fleming Island FL

Re: FUBAR "roadkill" M30 528e 10/13 Track Day Bro

Post by Bonsaibacker »

Great video. I dig watching the tags hanging from the mirror swing and sit sideways with the centripetal force. Pushing that car.
tschultz
Posts: 4102
Joined: Mar 01, 2009 7:58 PM
Location: Denver, Colorado
Contact:

Re: FUBAR "roadkill" M30 528e 10/13 Track Day Bro

Post by tschultz »

What spring rates did you settle on after all the combinations you tried??
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR "roadkill" M30 528e 10/13 Track Day Bro

Post by LeiseyJr »

tschultz wrote: Nov 03, 2020 9:22 AM What spring rates did you settle on after all the combinations you tried??
Front: 550lb
Rear: 400lb
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR "roadkill" This guy is using film in 2021?

Post by LeiseyJr »

So recently I bought a film camera. Wanted to teach myself about photography, so far I have learned a lot and still a lot more to learn. There is also a novelty to it I like. My friend got a Nikon FM and I got a Olympus OM-10.

First trip we went to Austin, just set the camera to auto with some Fuji C200 and Kodak Gold 200
Imager001-011 by Kurvenkamph Motorsport, on Flickr
Imager001-031 by Kurvenkamph Motorsport, on Flickr
Imager002-009 by Kurvenkamph Motorsport, on Flickr
Imager002-022 by Kurvenkamph Motorsport, on Flickr
Imager001-033 by Kurvenkamph Motorsport, on Flickr
Imager001-024 by Kurvenkamph Motorsport, on Flickr
Imager002-012 by Kurvenkamph Motorsport, on Flickr

Then I got to drive my fathers old racecar, the new owner offered
Imager001-013 by Kurvenkamph Motorsport, on Flickr
Imager001-014 by Kurvenkamph Motorsport, on Flickr
https://www.youtube.com/watch?v=DoZXQq1Bqj4

Speaking of Dad here is his 535i, (Fuji Pro 400H)
Imager001-023 by Kurvenkamph Motorsport, on Flickr

I shot some Portra 400 and 800 and wasn't happy with the colors. I think this is due to the lab
Imagear001-029 by Kurvenkamph Motorsport, on Flickr
Imagear001-024 by Kurvenkamph Motorsport, on Flickr
Imagear001-026 by Kurvenkamph Motorsport, on Flickr

At this point, I found my favorite film which is Ektachrome. I also upgraded to a Olympus OM2

ImageImg136 by Kurvenkamph Motorsport, on Flickr


Saw this 911:
ImageImg112 by Kurvenkamph Motorsport, on Flickr
ImageImg111 by Kurvenkamph Motorsport, on Flickr

TexFest was an adventure. Car did fine but was a LOT of driving. First we left Thursday night, got there to meet a guy who had a M60 swapped E30 that was broken (ektachrome 400)
Imageimg331 by Kurvenkamph Motorsport, on Flickr

Went to go eat: (ektachrome 400)
Imageimg315 by Kurvenkamph Motorsport, on Flickr

Friday Morning went to go eat: (ektachrome 400)
Imageimg405 by Kurvenkamph Motorsport, on Flickr

Then drove a shit ton with Chris, Jens, and Aaron (ektachrome 200)
Imageimg107 by Kurvenkamph Motorsport, on Flickr

That night I then went back to Houston (ektachrome 200)
Imageimg114 by Kurvenkamph Motorsport, on Flickr
Imageimg111 by Kurvenkamph Motorsport, on Flickr

Got home pretty late, got some sleep. Then woke up and headed an hour to MSRH:
Imageimg116 by Kurvenkamph Motorsport, on Flickr

https://www.youtube.com/watch?v=HLOp5zhs6zs&t=732s
https://www.youtube.com/watch?v=VSQweFXmfBs

Then I drove the 4 hours back to the gang still on the track tires
Thank You LJ for having a jack (mine broke),
Imageimg121 by Kurvenkamph Motorsport, on Flickr


Imageimg401 by Kurvenkamph Motorsport, on Flickr
Imageimg208 by Kurvenkamph Motorsport, on Flickr


On the way back home Sunday:
Imageimg222 by Kurvenkamph Motorsport, on Flickr
Imageimg217 by Kurvenkamph Motorsport, on Flickr

1000 miles in that bucket seat is quite tiring. It was a great weekend, hopefully next year I can document it better. I did not have a tripod at this point.

I got one though, and learned that is my favorite time to take pictures is at night:
Imager002-016 by Kurvenkamph Motorsport, on Flickr
Imager002-018 by Kurvenkamph Motorsport, on Flickr
Imager001-026 by Kurvenkamph Motorsport, on Flickr



I needed to get a fuel tank from Sherman in order to get mine repaired, as it cracked
Imagebr001-010 by Kurvenkamph Motorsport, on Flickr
Imagebr001-009 by Kurvenkamph Motorsport, on Flickr

Pictures of my girlfriends dog:
Imager002-011 by Kurvenkamph Motorsport, on Flickr
Imager001-026 by Kurvenkamph Motorsport, on Flickr

I am also am now developing and scanning myself, had to borrow a friends Olympus OM-D for these:
Image_1070028 by Kurvenkamph Motorsport, on Flickr
Image_1070025 by Kurvenkamph Motorsport, on Flickr
Image_1060010-2 by Kurvenkamph Motorsport, on Flickr
Image_1070026 by Kurvenkamph Motorsport, on Flickr
Image_1070027 by Kurvenkamph Motorsport, on Flickr
Image_1060018 by Kurvenkamph Motorsport, on Flickr
Image_1060016 by Kurvenkamph Motorsport, on Flickr
jayjaya29
Posts: 207
Joined: Jul 30, 2014 12:53 AM
Location: Atlanta, GA

Re: FUBAR 1/8 Trackday/This guy is using film in 2021?

Post by jayjaya29 »

Film is period correct for this forum.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 1/8 Trackday/This guy is using film in 2021?

Post by LeiseyJr »

jayjaya29 wrote: Jan 08, 2021 12:29 PM Film is period correct for this forum.
The guy using it isn't.
Tiit
Posts: 290
Joined: Oct 06, 2017 6:27 AM
Location: Canberra

Re: FUBAR 1/8 Trackday/This guy is using film in 2021?

Post by Tiit »

Haha. I love it. I’ve been thinking to do the same. I’d love to develop film as well.
It’s tricky getting colours right at night with street lighting.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 1/8 Trackday/This guy is using film in 2021?

Post by LeiseyJr »

Bonsaibacker
Posts: 967
Joined: Oct 26, 2017 3:36 PM
Location: Fleming Island FL

Re: FUBAR 1/8 Trackday/This guy is using film in 2021?

Post by Bonsaibacker »

LeiseyJr wrote: Jan 10, 2021 11:09 AM ImageADC439D8-0462-448F-ABAA-C71DB725D9F3 by Kurvenkamph Motorsport, on Flickr
Great picture.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 2/1 Manual Window and Cassette Player

Post by LeiseyJr »

LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 2/1 Manual Window and Cassette Player

Post by LeiseyJr »

.
Last edited by LeiseyJr on Feb 03, 2021 1:56 PM, edited 1 time in total.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 3/30 3 clutch diff

Post by LeiseyJr »

Built a 3 clutch diff, Thanks to Jay for convincing me to upgrade from the standard two clutch.

Built a Test Thing
Image154889896_1885673444942899_6464526083569885719_n by Kurvenkamph Motorsport, on Flickr

Only Tested at 30 ftlb breakaway
Image154696002_1885673778276199_9017332079924066283_n by Kurvenkamph Motorsport, on Flickr

That's why...

Image155096015_1885672258276351_2929441072857179836_n by Kurvenkamph Motorsport, on Flickr
Image153177964_1885673581609552_8742800546759403023_n by Kurvenkamph Motorsport, on Flickr

Image
155096015_1885672258276351_2929441072857179836_n by Kurvenkamph Motorsport, on Flickr
Image154368294_1885673638276213_805346527142916284_n by Kurvenkamph Motorsport, on Flickr

Install
Image155353133_1885673861609524_7667024914707516184_n by Kurvenkamph Motorsport, on Flickr


So car has been open diff'ing. Swapped a healthy S3.46 into dads car. Rebuilt his old diff with 250k on it. We thought it was healthier then it was. So I ordered 2 clutch packs from FCPEuro, and I had a S2.93 parts diff with super nice clutches. Used the best one for my 3rd clutch and its dogplate. Reused/flipped the dogplates and then reassembled. It has been one of the best things I have done to the car. Very happy with it, other then it is leaking a bit. Had the new sideseal orings, but didn't install them like an idiot. Luckily just weeping, no drops on the floor.
Last edited by LeiseyJr on Mar 30, 2021 12:11 PM, edited 1 time in total.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 3/30 Track Event and 3 clutch diff

Post by LeiseyJr »

Did a trackday with PCA was good to finally be back at a HPDE. Car did great, the new 3 clutch diff feels super good. The Toyo RA1s are also very nice.

Gave some modern porsche hell and the olders one too
https://www.youtube.com/watch?v=1xubxMAT1kk&t=127s
https://www.youtube.com/watch?v=41iCd5w5ZnI&t=106s

This weekend I went without the ghetto catchcan, so I had to leave it in 4th through the slow section of the track, good way to practice carrying momentum.

Really Proud of this pic:
Image163304416_1901017500075160_961744329600746453_n by Kurvenkamph Motorsport, on Flickr

Enjoy the rest of the pictures:
Image164354392_1900947220082188_4932338448861197918_n by Kurvenkamph Motorsport, on Flickr
Image163394913_1900946776748899_1262301007011750578_n by Kurvenkamph Motorsport, on Flickr
Image163565193_1900946630082247_4903217465442937509_n by Kurvenkamph Motorsport, on Flickr
Image163523735_1900251133485130_8299332742995561966_n by Kurvenkamph Motorsport, on Flickr
Image163571853_1900251070151803_7697238196982871714_n by Kurvenkamph Motorsport, on Flickr
Image163687755_1900251200151790_2934937549752637728_n by Kurvenkamph Motorsport, on Flickr
tschultz
Posts: 4102
Joined: Mar 01, 2009 7:58 PM
Location: Denver, Colorado
Contact:

Re: FUBAR 3/30 Track Event and 3 clutch diff

Post by tschultz »

Great photos.

Was the diff upgrade as simple as remove and replace the clutch plates? And what's the biggest advantage you have seen-- you mention it as a great upgrade but don't say why...
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 3/30 Track Event and 3 clutch diff

Post by LeiseyJr »

tschultz wrote: Mar 30, 2021 2:48 PM Great photos.

Was the diff upgrade as simple as remove and replace the clutch plates? And what's the biggest advantage you have seen-- you mention it as a great upgrade but don't say why...
Yes there’s a 4mm space you remove and add a clutch disc/dog ear in its spot. They do wear a bit uneven but it’s cheap and easy enough to do.

I have noticed a lot more rear grip on corner exit. I thought the car would slide more but that is not the case. Actually using traction of both rear tires on corner exit, and car overall feels more mannered. It just made it way easier to drive. When I try to drift the car now when it is wet also no random one tire fire, both tires stay locked all the time.

On a mostly street oriented car that has street tires, I don’t think the upgrade is necessary. Just fresh clutches should be more then enough.
Tiit
Posts: 290
Joined: Oct 06, 2017 6:27 AM
Location: Canberra

Re: FUBAR 3/30 Track Event and 3 clutch diff

Post by Tiit »

Nice pics.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 3/30 Track Event and 3 clutch diff

Post by LeiseyJr »

Made my own eprom today. Happy about that.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 5/3 Track Day Vids

Post by LeiseyJr »

Nothing much has changed. I installed a Euro ecu with a correctly adjusted AFM car likes it.

Had another track weekend. Had a lot of fun. It was raining Saturday and I was on really bad rear tires (heat cycled and low tread), so really interesting.

https://www.youtube.com/watch?v=Qthrko_S9aQ&t=62s


Sunday it dried out and had a lot of fun. I did miss a session because my key fell behind my grill, when adding oil. That took 30 minutes to figure out.

https://www.youtube.com/watch?v=TUpKNiL7TBU

https://www.youtube.com/watch?v=AcYoM2WY1p4
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 5/3 Track Videos

Post by LeiseyJr »

Finally decided to trust my EPROM for a full track day day. Car did great ran all 70 laps without a real issue,

Only issue is the rear (shit reman driveshaft) u-joint is squeaking (was doing it before the track event) and y pipe fell off. Engine is still moving a bit too much.

Car has cost me a lot in consumables, which is killing me. Tires, brakes, etc.

Tire wear is Excellent, but they are dead so was a slidey weekend.

https://www.youtube.com/watch?v=IyQ3RBWjuUc
Lap with no traffic

https://www.youtube.com/watch?v=etqWM-wArFw
Chasing a Spec Miata

https://www.youtube.com/watch?v=RKcD2faYKKw
Good slide here at 2:00 min
Bonsaibacker
Posts: 967
Joined: Oct 26, 2017 3:36 PM
Location: Fleming Island FL

Re: FUBAR 6/8 Another Track Day

Post by Bonsaibacker »

Great videos and pics. Subscribed.
Tiit
Posts: 290
Joined: Oct 06, 2017 6:27 AM
Location: Canberra

Re: FUBAR 6/8 Another Track Day

Post by Tiit »

What’s your current suspension setup? Is camber adjustable? Roll centre correction?
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 6/8 Another Track Day

Post by LeiseyJr »

Tiit wrote: Jun 09, 2021 12:02 AM What’s your current suspension setup? Is camber adjustable? Roll centre correction?
https://www.mye28.com/viewtopic.php?t=150009

TLDR
Stock Geometry (no roll center correction, no eccentrics).
Camber Adjustable in the Front
Frankenstein Koni coilover setup
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 6/8 Another Track Day

Post by LeiseyJr »

Bonsaibacker wrote: Jun 08, 2021 7:39 PM Great videos and pics. Subscribed.
Glad someone is enjoying it.
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 6/22 Autocross! Brown Steering Wheel!

Post by LeiseyJr »

After last event, I broke the diff mount, and screwed up the rearmost U joint on the driveshaft.

Jay was kind enough to send me a new to me diff mount. Thanks Jay!

I cobbled together two driveshafts again.
ImageIMG_2208 by Kurvenkamph Motorsport, on Flickr

Car went on a roadtrip.
ImageIMG_2027 by Kurvenkamph Motorsport, on Flickr
ImageIMG_2033 by Kurvenkamph Motorsport, on Flickr



Car survived an auto-x. Really happy with how it did, competitive against an e30 with a s52.Hopefully next time with fresh tires and or a drivers mod, can match his time.
ImageIMG_2137 (1) by Kurvenkamph Motorsport, on Flickr

https://www.youtube.com/watch?v=awQta1Jkbwc

It now has a brown steering wheel!
ImageIMG_2202 by Kurvenkamph Motorsport, on Flickr









ImageIMG_2028 by Kurvenkamph Motorsport, on Flickr
LeiseyJr
Posts: 1527
Joined: Dec 22, 2013 10:11 PM
Location: Houston,Tx

Re: FUBAR 7/1 Dyno

Post by LeiseyJr »

ImageIMG_2458 (1) by Kurvenkamph Motorsport, on Flickr


My tune:https://www.youtube.com/watch?v=2TmRgFjM3SA
Stock 061: https://www.youtube.com/watch?v=VXCi0y_jaxA

Dyno'd!!!!!!!!!!!!

So I compared my chip tune to the stock euro tune. Those are the best of the 4 runs, two runs for each. Was pretty consistent, my tune more so.

+16 whp and +10ftlb for the peaks. The power under the curve is higher everywhere.

Assuming 15% drivetrain loss that is 230 crank hp with my tune and the stock euro ecu is 208 crank. A little upsetting to see it's less than 218 with stock DME but with 98 ambient the DME is probably pulling timing.

Torque Curve is healthy, but will need bigger valves to have less of a taper after 6000.
Tiit
Posts: 290
Joined: Oct 06, 2017 6:27 AM
Location: Canberra

Re: FUBAR 7/1 Euro M30 Dyno

Post by Tiit »

Solid gains. Are the gains in ignition timing?
Post Reply