Page 2 of 12
Re: Any interest in a laser cut light switch surround?
Posted: May 31, 2017 1:12 PM
by ElGuappo
Man am I glad I hoarded some of the reinforced versions of this piece...They are so much stronger.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 01, 2017 4:29 PM
by TCBimmer
russellrh72 wrote:demetk wrote:Here's the list,
MicahO - 2
atibbitts
Philo
Nebraska_e28
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Can you guys update to mention your preference for a painted or unpainted version.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 01, 2017 5:10 PM
by demetk
Thanks, here's the updated list,
Here's the list,
MicahO - 2
atibbitts
Philo
Nebraska_e28
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
Can you guys update to mention your preference for a painted or unpainted version.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 02, 2017 10:41 PM
by dsmith
demetk wrote:Thanks, here's the updated list,
Here's the list,
MicahO - 2
atibbitts
Philo
Nebraska_e28
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith-2-unpainted
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
Can you guys update to mention your preference for a painted or unpainted version.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 03, 2017 8:16 PM
by demetk
Thanks, here's the updated list,
MicahO - 2
atibbitts
Philo
Nebraska_e28
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith-2-unpainted
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
matchgrade - 2 - painted
Re: Any interest in a laser cut light switch surround?
Posted: Jun 04, 2017 5:23 AM
by SlickDizzy
I'm in for a painted one.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 04, 2017 6:12 AM
by atibbitts
demetk wrote:Thanks, here's the updated list,
MicahO - 2
atibbitts - painted
Philo
Nebraska_e28
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith-2-unpainted
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
matchgrade - 2 - painted
Re: Any interest in a laser cut light switch surround?
Posted: Jun 04, 2017 8:10 AM
by demetk
Thanks, here's the updated list,
MicahO - 2
atibbitts - painted
Philo
Nebraska_e28
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith-2-unpainted
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
matchgrade - 2 - painted[/quote][/quote]
SlickDizzy - 1 - painted
Re: Any interest in a laser cut light switch surround?
Posted: Jun 04, 2017 8:35 PM
by afeustel
+1 painted please.
Thanks
Drew
Re: Any interest in a laser cut light switch surround?
Posted: Jun 04, 2017 11:18 PM
by Wolf1971
In for a painted one.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 05, 2017 9:37 AM
by MattC
I'm in for one - painted.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 05, 2017 10:33 AM
by ma.jomaa
Painted please.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 05, 2017 11:08 AM
by demetk
Thanks, here's the updated list (26 pieces)
MicahO - 2
atibbitts - painted
Philo
Nebraska_e28
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith - 2 - unpainted
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
matchgrade - 2 - painted
SlickDizzy - 1 - painted
afeustel - 1 - painted
Wolf1971 - 1 - painted
ma.jomaa - 1 - painted
MattC - 1 - painted
athayer187 - 1 - painted
I haven't finalized the number of pieces yet with the shop. Looks like I may do 40 pieces.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 05, 2017 9:14 PM
by jeffg
I'm in for one. Painted. Thanks.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 05, 2017 11:23 PM
by 86GT635
What's eta on these? Mines broke. It actually might be the last broken thing in the interior plastic other than dash.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 06, 2017 7:42 AM
by demetk
They're a week away from being made and then they need to be painted. So I would say 2-3 weeks.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 06, 2017 10:59 AM
by Nebraska_e28
demetk wrote:Thanks, here's the updated list (26 pieces)
MicahO - 2
atibbitts - painted
Philo
Nebraska_e28 - painted
Rich in Tupelo - unpainted
cibie - 2
russellrh72 - painted
flywheel86
Bimmerman
dsmith - 2 - unpainted
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
matchgrade - 2 - painted
SlickDizzy - 1 - painted
afeustel - 1 - painted
Wolf1971 - 1 - painted
ma.jomaa - 1 - painted
MattC - 1 - painted
athayer187 - 1 - painted
I haven't finalized the number of pieces yet with the shop. Looks like I may do 40 pieces.
Painted please, thanks!
Re: Any interest in a laser cut light switch surround?
Posted: Jun 06, 2017 3:40 PM
by cibie
MicahO - 2
atibbitts - painted
Philo
Nebraska_e28 - painted
Rich in Tupelo - unpainted
cibie - 2 - painted
russellrh72 - painted
flywheel86
Bimmerman
dsmith - 2 - unpainted
Sam 84, 533i
ma.jomaa
TCBimmer - 2 - painted
Sam 84, 533i - painted
matchgrade - 2 - painted
SlickDizzy - 1 - painted
afeustel - 1 - painted
Wolf1971 - 1 - painted
ma.jomaa - 1 - painted
MattC - 1 - painted
athayer187 - 1 - painted
Re: Any interest in a laser cut light switch surround?
Posted: Jun 06, 2017 11:40 PM
by flywheel86
I'll take a painted one - but will take one either way, painted or unpainted
Re: Any interest in a laser cut light switch surround?
Posted: Jun 06, 2017 11:52 PM
by 86GT635
1 painted
Thank you Demetk for the work, and foamy for the work too. Foamy did all the heavy lifting with the measurements and prototype. He does need to be "reprimanded" for such a heinous deed. How can I tip the inventor?
Re: Any interest in a laser cut light switch surround?
Posted: Jun 07, 2017 10:54 AM
by kittenmittonz
I'll take one painted.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 07, 2017 11:56 AM
by demetk
86GT635 wrote:1 painted
Thank you Demetk for the work, and foamy for the work too. Foamy did all the heavy lifting with the measurements and prototype. He does need to be "reprimanded" for such a heinous deed. How can I tip the inventor?
Welcome. Heavy lifting? Hardly, the thing only weighs about 4 oz.
-- Added Wed Jun 07, 2017 11:11 am --
86GT635 1-painted
afeustel 1-painted
athayer187 1-painted
atibbitts 1-painted
Bimmerman 1
cibie 2-painted
dsmith 2-unpainted
flywheel86 1-painted
kittenmittonz 1-painted
ma.jomaa 1-painted
matchgrade 2-painted
MattC 1-painted
MicahO -2
Nebraska_e28 1-painted
Philo 1
Rich in Tupelo 1-unpainted
russellrh72 1-painted
Sam 84, 533i 1-painted
SlickDizzy 1-painted
TCBimmer 2-painted
Wolf1971 1-painted
Total = 26
Re: Any interest in a laser cut light switch surround?
Posted: Jun 07, 2017 11:44 PM
by Crazy_Canuck
86GT635 1-painted
afeustel 1-painted
athayer187 1-painted
atibbitts 1-painted
Bimmerman 1
cibie 2-painted
dsmith 2-unpainted
flywheel86 1-painted
kittenmittonz 1-painted
ma.jomaa 1-painted
matchgrade 2-painted
MattC 1-painted
MicahO -2
Nebraska_e28 1-painted
Philo 1
Rich in Tupelo 1-unpainted
russellrh72 1-painted
Sam 84, 533i 1-painted
SlickDizzy 1-painted
TCBimmer 2-painted
Wolf1971 1-painted
Crazy_Canuck 1-painted
Total = 27
Re: Any interest in a laser cut light switch surround?
Posted: Jun 08, 2017 8:01 PM
by onceler
I'd be interested in one, no need to paint, I can do that here.
Has a final price been determined?
Re: Any interest in a laser cut light switch surround?
Posted: Jun 08, 2017 8:29 PM
by tangerineman91
I'll take one painted.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 09, 2017 9:47 AM
by demetk
Unpainted version will be $30 and the painted version will be $37. The price will include US shipping, paypal fees and a small profit for foamy.
Unpainted versions should be available next week.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 09, 2017 9:51 AM
by camplo
I'll take one unpainted
Re: Any interest in a laser cut light switch surround?
Posted: Jun 10, 2017 4:08 PM
by onceler
demetk wrote:Unpainted version will be $30 and the painted version will be $37. The price will include US shipping, paypal fees and a small profit for foamy.
Unpainted versions should be available next week.
Sweeeet!! I've needed a new one for years.
Re: Any interest in a laser cut light switch surround?
Posted: Jun 12, 2017 9:01 AM
by MicahO
Re: Any interest in a laser cut light switch surround?
Posted: Jun 12, 2017 12:10 PM
by atibbitts
When do you want payment and to what email address? Any idea on a ship date yet? Thanks.
