MyE28.com

They will fit both e28 and e28 chassis. For the rear, make sure your mount style is the one depicted in the first post on this page. Some earlier models had a different rear mount and this kit won't work with those.

Aaron

Seihackguei wrote:Will this fit e28 as well? I need a set for the rear! Thanks! Where do I pay? Can you contact me at eastoakland01@yahoo.com thanks!

-- Added Jul 03, 2018 11:43 AM --

I still actually have some sets left! I keep thinking that this might be the last round, and there seems to be enough interest for more. Hopefully a lot of people now have well attached sway bars!

Let me know if you're interested in a front and/or rear kit.

Thanks for all the support,

Aaron

I keep putting this off for the race car. I need a set! Sending you an email now.

I now have additional stock of rear kits, for those waiting until they were back in stock.

nik77356 wrote:I keep putting this off for the race car. I need a set! Sending you an email now.

intrested pmd

So I did end up making another batch of kits, if anyone still needs to fix up their sway bar mounts.

I keep thinking, is this the last set of kits? But apparently there are still e28/e24 out there needing some work.

I can turn them around in 2-3 days usually.

ok, I just sent you an email. Then saw this thread. I need a whole kit or two. What do you need from me?

Hi, I’d like a set. Found out I don’t have a rear sway bar... looks torn off.
What do you need from me?

Anyone else interested in front and/or rear kits? Still have some leftover from the last round.

If so, feel free to message me directly with what you're looking for and I should be able to get them out this week.

Thanks,

Aaron

Great items, thanks for making

akluminus wrote: Oct 28, 2019 7:04 PM Anyone else interested in front and/or rear kits? Still have some leftover from the last round.

DM'd, looking for a full set

Anyone looking for front or rear kits? I have a few rear kits left on hand, and no front kits right now.

I'd be able to kick off another front batch with ~3 more orders, if there is sufficient interest.

I would be interested in a front set.

Hi, I’m interested in a set for both front and rear.

Thanks all - I'll get another batch of front kits going!

I am also interested for a front and rear kit asap. Thank you!

I’d also take a set when they become available.

Hi all, I now have both front and rear kits in stock. Direct message me if you're looking for a set and I haven't already reached out to you.

akluminus wrote: Jul 03, 2018 5:06 PM They will fit both e28 and e28 chassis. For the rear, make sure your mount style is the one depicted in the first post on this page. Some earlier models had a different rear mount and this kit won't work with those.

Aaron

Seihackguei wrote:Will this fit e28 as well? I need a set for the rear! Thanks! Where do I pay? Can you contact me at eastoakland01@yahoo.com thanks!

Any rear kit for the early models?

I haven't developed them, no. Haven't had access to that style mount, and to date have only got a few requests.

Hi all, this is my very low frequency bump to see if anyone needs any front or rear reinforcement kits for their sway bars. Have a few left from the last production batch. Can usually ship out in a few days.

Hi, I would need a set of weld-in brackets (not full kits) for front and rear.
Tried to send PM but not sure if it went trough.

Apologies for the slow response, I wasn't getting email notifications, I think I got back to everyone, but if I didn't, let me know.

Do you have any rear kits available? I have ripped out the rear mount on one of my cars.

Manny D. wrote: Jan 16, 2024 7:54 PM Do you have any rear kits available? I have ripped out the rear mount on one of my cars.

Yep, have some on hand still, try to keep a few around. I've moved these to a square shopping site here to try to get away from Paypal:

https://www.limitedslip.net/

Do anyone have any more information on re-routing the oil cooler lines when installing the front sway bar brackets? I have my car in the shop next door for the welder to do the welding of the front brackets. The welder was asking about the oil cooler lines and if there are any more specific instructions on what is needed to re-route them. I'm probably one of the few who's installed these on an automatic but hopefully someone can help me out.

I personally haven't seen one yet so I can't be of much help unfortunately. If any of the cooler lines have hose clamps on the end, it's probably fairly low pressure and you can use a similarly rated/sized hose and some barbed unions, but I'm guessing a bit.

Aaron

Manny D. wrote: Jan 17, 2024 4:48 PM Do anyone have any more information on re-routing the oil cooler lines when installing the front sway bar brackets? I have my car in the shop next door for the welder to do the welding of the front brackets. The welder was asking about the oil cooler lines and if there are any more specific instructions on what is needed to re-route them. I'm probably one of the few who's installed these on an automatic but hopefully someone can help me out.

akluminus wrote: Jan 17, 2024 5:59 PM I personally haven't seen one yet so I can't be of much help unfortunately. If any of the cooler lines have hose clamps on the end, it's probably fairly low pressure and you can use a similarly rated/sized hose and some barbed unions, but I'm guessing a bit.

Aaron

They are high-pressure lines I believe. They have crimped connections at the rubber and tapered fittings at the radiator/transmission IIRC. The welder jokingly said "Cooler delete", but I don't feel like forcing myself to do another 5-speed swap. I would like to keep the auto on this car if possible.

If I saw a few pictures, I might be able to offer some suggestions, either this thread or a new one.

Random idea: are the right hand drive parts on the same side?

On my v8 swap project, I was able to find a local hydraulic supply shop that could make me a new high pressure power steering hose by reusing the ends I already had (metric banjo). Might be able to take them to a shop and either get new longer ones?

Everyone's sway bars firmly attached for summer drives?

I have some extra kits from the last run if they aren't!

I hope a super-infrequent bump on this thread is acceptable. I still have extra kits if anyone needs to get their sway bar mounts fixed over the winter.