Page 1 of 2
engine bay thread
Posted: Feb 27, 2012 12:21 AM
by Budski
searched and didn't see one for everyone to post their own.
here is mine currently, engine is getting pulled this week and its getting new color along with fixing all the haggardness going on.
Posted: Feb 27, 2012 1:20 AM
by E.rouzbeh.28
Nice HAI.
Posted: Feb 27, 2012 1:27 AM
by Budski
yea its an eyesore for sure, I'll post photos up when its done.
Posted: Mar 01, 2012 1:07 AM
by 1st 5er
I don't think I've seen worse.
Posted: Mar 06, 2012 1:00 AM
by beanzermin
picked these up from my powder coater last week. gonna install them this weekend!
Posted: Mar 06, 2012 10:20 AM
by OcCoupe
beanzermin wrote:picked these up from my powder coater last week. gonna install them this weekend!
Make sure your hoses are clamped tightly to the housing and that all the sensors are on snug with new crush washers. I powder coated my housing and a small amount of coolant seeped out of one sensors and etched the paint. Now it's a big eyesore.
Posted: Mar 06, 2012 11:35 AM
by fastcrs
beanzermin wrote:picked these up from my powder coater last week. gonna install them this weekend!
Cant waite to see them on...they look great!
Re: engine bay thread
Posted: Mar 06, 2012 9:06 PM
by LandCruzer94
Budski wrote:searched and didn't see one for everyone to post their own.
here is mine currently, engine is getting pulled this week and its getting new color along with fixing all the haggardness going on.
Chevy orange!!!
Posted: Mar 06, 2012 9:17 PM
by Slow_Ballin'
Nothing fancy...
Posted: Mar 06, 2012 9:43 PM
by clongo
Here is mine. I still have a lot of cleaning up to do!
Posted: Mar 06, 2012 11:05 PM
by 1st 5er
Posted: Mar 07, 2012 12:07 AM
by beanzermin
OcCoupe wrote:Make sure your hoses are clamped tightly to the housing and that all the sensors are on snug with new crush washers. I powder coated my housing and a small amount of coolant seeped out of one sensors and etched the paint. Now it's a big eyesore.
thanks for the heads up. hoses shouldn't be an issue they are silicone. i had to fight with them on the housing just to get them on took me about 20 minutes to do so. lol.
last 2 shots are money!
Posted: Mar 07, 2012 12:20 AM
by 535is-pa
this
swapped to this
sold to this
[/img]
Posted: Mar 07, 2012 1:31 AM
by vinceg101
This is from last September before the Headlamp Washer System went in the M535i:
I'll have a more recent one after next week.
Posted: Mar 07, 2012 7:01 AM
by TheLazyDog
Re: engine bay thread
Posted: Mar 07, 2012 9:27 AM
by mooseheadm5
Budski wrote:
That intake is hot.
I mean that literally, all that intake does is suck in hot air from right above the exhaust manifold. Horsepower reducing mods FTW!
Posted: Mar 07, 2012 2:58 PM
by pldlnr
Non-E28.
Posted: Mar 07, 2012 6:57 PM
by Das_Prachtstrasse
Filthy at the moment, pre re-installation of turbo.
Posted: Mar 07, 2012 10:40 PM
by winfred
my whistle pig
Posted: Mar 07, 2012 10:53 PM
by fastcrs
Needs a clean...
Posted: Mar 08, 2012 11:43 PM
by CSBolger
The earliest one I can find...
After the B34 head went on the B35 bottom end.
The next round of wire-tucking and painting has commenced. Expect the PCV rerouted to the IACV port on the manifold, IACV delete, battery relocation, M30B28 intake manifold, MAF, hydroboost system removal, coolant overflow rerouted to battery tray, and a lot more copper hardware, all by the end of the year.
Posted: Mar 09, 2012 12:28 AM
by 1st 5er
CSBolger wrote:... coolant overflow rerouted to battery tray...
This one I'm curious about.
Posted: Mar 09, 2012 12:43 AM
by CSBolger
1st 5er wrote:This one I'm curious about.
Should work out well. I plan to adapt a copper tank to go along with all of the other hardware in the bay.
Posted: Mar 09, 2012 12:48 AM
by 1st 5er
CSBolger wrote:1st 5er wrote:CSBolger wrote:... coolant overflow rerouted to battery tray...
This one I'm curious about.
Should work out well. I plan to adapt a copper tank to go along with all of the other hardware in the bay.
I believe it is the highest point in the system for a reason.
Posted: Mar 09, 2012 1:32 AM
by OcCoupe
Posted: Mar 09, 2012 1:35 AM
by 1st 5er
OcCoupe wrote: ... MANY AWESOME PICS ...
Still a work in progress.
Aren't they all?
Where's my drooling emoticons?
Posted: Mar 09, 2012 1:44 AM
by Crazy_Canuck
Posted: Mar 09, 2012 8:47 AM
by shagrath
Dayum look bhow much room there is in there! Doesn't look natural without the 6 cylinder in there.
My wife's. I Probably need to change out the wires and plugs (been a while according to records) and do something about that bypass hose. But notice the almost brand new expansion tank (2 years old)!
Posted: Mar 21, 2012 1:07 PM
by Budski
Posted: Mar 25, 2012 4:13 PM
by beanzermin
got it installed