MyE28.com

1988 325is 5 speed.

Motor SOLD
Engine wiring harness SOLD
Transmission SOLD
Front 'is' lip GONE
Trunk lid SOLD
Steering wheel Sale Pending
ECU Sale Pending
AFM Sale Pending
Instrument cluster Sale Pending
Heater valve Sale Pending
Front seat belt receivers Sale Pending
Wheels SOLD
Headlight assemblies SOLD

Right front fender is very good condition.
Left front fender has a small dent (see below pics)
Hood has several dents (looks like hail dings)
Interior is black (seats are dry, cracked and torn).
Dash is cracked.

What do you need/want?
I'll post pics if wanted.


P.S.
I have a separate listing for an e2i swap kit.

Front license plate bumper trim panel? I don't want the thing that will hold a license plate because my car has mad rake and I've already rubbed that part off so I need something to fill the gap and smooth out airflow when I floor the gas pedil.
Thnx

No filler strip, TX requires front tags.

Here's a few pics:

I wonder if that steering wheel will fit an '87. My wheel has the horn in the center and all the plastic pieces in the steering column disintegrated disabling my horn. I'm thinking that wheel would be easier to cobble together a fix instead of drilling holes and placing a button on the side of the column.
I miss my horn and NC inspection surely will too. I'll do some research this P.M.

Prices for the elips and the fogs? Also need the blank plug or 2 from the dash. Thanks.

Interested in the cluster, the heater valve, the ICV, and the front seat belt receivers.

oldskool - that wheel will fit an 87 E28 if that's what you're asking, BTDT.

How's those fenders look? Any sign of a respray? Any damage?

ahab wrote:Interested in the cluster, the heater valve, the ICV, and the front seat belt receivers.

The ICV isn't available, unless it's not a necessary part of the e2i swap.
Seat belt receivers? Fronts, rears or both?

PM sent.

austin8753 wrote:How's those fenders look? Any sign of a respray? Any damage?

Not sure about respray.
There is only clear coat peel on the driver side door and both mirrors.
The passenger fender is OK but the driver side has a small dent.

If there's clear coat, then it's been resprayed. Color looks off from OEM (could be the Texas sun,) so I'll keep looking. Finding Zinno parts in the PNW has proven to be impossible!

GLWS!

1st 5er wrote: Not sure about respray.
There is only clear coat peel on the driver side door and both mirrors.

Again there isn't clear coat peel anywhere but the places indicated so it's possible the other pieces haven't been resprayed.

The guy who bought the trunk lid used a small bit of rubbing compound on a small area and said it was single stage paint.

1st 5er wrote:
Again there isn't clear coat peel anywhere but the places indicated so it's possible the other pieces haven't been resprayed.

The guy who bought the trunk lid used a small bit of rubbing compound on a small area and said it was single stage paint.

Hmmm. If you have any compound, you should try to shine one part of it and see how it looks. If it's OEM paint, I am interested. Wonder what shipping would cost on something like that?

The last E28 fender I shipped was, IIRC, $55.00 via GH.

1st 5er wrote:The last E28 fender I shipped was, IIRC, $55.00 via GH.

I'll keep looking locally, but if I don't find anything, I will contact you!

That's cool.

Thanks for the .

Bump for a great guy!

Prices for the kits and fog? Thanks.