MyE28.com

Hello everyone,

I have an E34 M5 with a S38 B38 engine. I am slowly walking the turbo route and my clutch has died.

I will replace the Flywheel with the S38 B36 Single Mass flywheel (surfaced).

I am interested in the -765 Sachs PP for its holding capability and availability in EU. However I don't know the best clutch to use.

I would like to hold as much tq as possible, with some drivability, so maybe I should avoid the puck sinter metallic.

Is there any clutch you would reccommend? Sprung Hub?

Thanks,
Paulo

Clutch masters kevlar disk has worked well for years of abuse.
marc

At what torque level? Any drivability issues?

Do you have a link for that clutch? Is it sprung hub?

Mine is a full circle disk w/ spring hub, and clutch masters pp. I was surprised how light the pedal was after trying a spec stage 2 . I'm maxing out my m106 /k27 at 18# somewhere around 325hp /325 torque and I abuse it every chance I get. I've had it for several years now and highly recommend.
marc

http://www.clutchmasters.com/

Thanks. However I will need a stronger solution for around 800nm-1000nm.

I am looking for a sprung hub, marcel Spring, multi puck clutch with some aggressive material, either ceramic or sintered...

Besides clutchmasters, what would you recommend?

765 with oem disc is MORE than enough for a B38,,,, N/A

i think the Sachs 765 is one of the best press that is around,,

but you could also go ..http://www.specclutch.com/cars/BMW/M5/1992/Single if you want to go heavy duty F/I