MyE28.com

Alright guys LAZY E28 PART OUT begins soon.
(Disclaimer: I work a full time job alone with a part time one, so I may not have the time to pull your wanted part immediately.)
Bought a parts car because there are a few things my current project from the donor.
Feel free to start requesting.

1986 535i, 160k mileage, manual 5 speed trans, all parts are as seen, feel free to request any photos.
Location is in Indianapolis, local pick up is always preferred, any larger parts (if i'm willing to pull) you will need to arrange shipping, or at least suggest a way.
EDIT: My paypal email is coleton.coronado@gmail.com

UPDATE:
Engine------------- SOLD
Trans---------------SOLD
Driveshaft----------SOLD
Instrument clusterSOLD
Blower motor------SOlD
Ignition wires and coil SOLD
Radiator-----------SOLD
Carpet--------------SOLD
HVAC center panels---SOLD
Rear bumper--------SOLD

Items that I still have: Doors, R/H mirror, Deck lid, Hood (1 decent sized dent), Air filter housing, AFM, seat motors, rear seat cushion, both tail lights, headlight housings, ceiling check panel, OBC, misc that you see left in pictures.

I'll buy the caps off your wheels

Also the badge if yours aren't shot

Im looking for the pipe that connects the air box with the thing in the front of the car. How much shipped to 85716?

Set aside the oil radiator/cooler for me, no rush.

I need the o2 sensor, working or not. You can even cut it just above the sensor, I really only need the wire and harness. Usps bubble envelope is cheap/easy for you.

I'd like that rear lower seat cushion, shipping via greyhound is really easy, if there's a station near you.

No rush, been looking for one for a while… my rear seat has had a big tear across the center occupant space since the car was 2 weeks old.

Since I love this community, after work today I started taking off some of the easier parts




Rallygofaster was wondering if you were ok with this little bit of wear on this back seat cushion

Rebelxnut don't know if you still want this air intake tube since it has a hold in it.

The cushion has a little more wear than I'd like for something we'd have to ship.

On that note, how is the condition of the shift boot? I'd take that off your hands if it is in decent enough shape.

Front seat belt receptacles? Assuming the belts click in and out correctly?

How much you want for the distributor cap and one wire?
Mine has some creepy pale turquoise colored corrosion going on inside the cap under the wire just below the coil wire plug. 3d from bottom.
Andy

how much for the intrument cluster, condisdering everything in it works.
also how much for the air box and assoc. hardware?
thanks

rallygofaster wrote:The cushion has a little more wear than I'd like for something we'd have to ship.

On that note, how is the condition of the shift boot? I'd take that off your hands if it is in decent enough shape.

I'm keeping the shift boot since mine was missing in the project car.

four2zerohero »
how much for the intrument cluster, condisdering everything in it works.
also how much for the air box and assoc. hardware?
thanks

Cluster was one item i needed myself. $30 + shipping for the air box hardware.

Removed the dash today in case anyone is in need.

Is this car Arktisblau? If so, is it original paint? I've been looking for a long time for the front drivers side door and gas filler lid in that color to replace the damaged parts on my car. I'm in CA and it would probably be really expensive to ship but worth a shot.

edosocho wrote:Is this car Arktisblau? If so, is it original paint? I've been looking for a long time for the front drivers side door and gas filler lid in that color to replace the damaged parts on my car. I'm in CA and it would probably be really expensive to ship but worth a shot.

yes the color is Arktisbau, looks like the car has been painted in the past because in other areas of the air i can see a more aged blue underneath, door is in pretty good condition, although its not slick paint by any means.

Ok. I'm trying to find parts that are close in condition to the car I have....might be wishful thinking. Thanks for replying!

Engine, 5 speed trans, drive shaft, and everything directly related is now out if anyone is in need. I was very content with myself today.

Bcbp14 wrote:
I need the o2 sensor, working or not. You can even cut it just above the sensor, I really only need the wire and harness. Usps bubble envelope is cheap/easy for you.

I got the exhaust off today, so i can have you're sensor ready soon. But just to be clear you need the 2 prong plug and wiring up to the sensor?

Hmm, I think it's a three prong. It connects just aft of the speed and reference sensors near the fire wall. I'll take it though.

5 days into the partout and you've pulled the motor? doesn't seem like a lazy part out to me haha

BDK528e wrote:5 days into the partout and you've pulled the motor? doesn't seem like a lazy part out to me haha

Yeah once I got started I kinda got carried away

Do you have a working drivers side rear window motor?

ASneakyGoomba wrote:Do you have a working drivers side rear window motor?

Sorry for such a late reply, I'm not sure about any of the electrical since the car has been dead since I got it due to electrical rats nest.

how much for a driver side tail light shipped to 12550

Casenine wrote:how much for a driver side tail light shipped to 12550

$35+shipping (which i'll have to check tomorrow) since there is some crazing that can't quite be caught on my shitty phone quality camra

Updated a list of what is sold.
Also if I haven't gotten back to any of you its either because I'm not sure how to removed said item due to no power (seat items), or i've been busy and haven't got to it (just give me a friendly reminder).

Still waiting for you to confirm about the oil cooler

How is the driver's side view mirror motor and housing bits? Is it pretty tight and adjustable? Mine is thrashed.

Pauly Walnuts wrote:How is the driver's side view mirror motor and housing bits? Is it pretty tight and adjustable? Mine is thrashed.

Stole the drivers mirror for my other E28

So...I need just the 2 caps that cover the wiper arm tightening screws. Still have them? I know, probably a strange request. Let me know.

Mike

Bump since I plan on sending her to the scrap yard in roughly 7 days.
Carpet is out as requested from a member.

Hello,

I need the two rubber strips at the bottom of the hood liner. The ones that are black and fit somewhat in the inserts on the firewall.

Shipping to Santa Fe NM?
thanks,
Jeff