MyE28.com

ALL 20 SETS HAVE BEEN SPOKEN FOR! THANK YOU ALL FOR MAKING THIS A REALITY! All payments have been received and the adapters will ship soon!

PAID MEMBERS/SETS:

1. SlickDizzy - one set (both seats)
2. whelton25 - one set (both seats) + extra fasteners
3. Rennsportguy - one set (both seats)
4. HAYSEED - one set (both seats)
5. rmiddendorf - one set (both seats) + extra fasteners
6. bshi - one set (both seats) + extra fasteners
7. p2592b - one set (both seats)
8. BimmerDan - one set (both seats) + extra fasteners
9. Foonfer - one set (both seats) + extra fasteners
10. Raj - one set (both seats) + extra fasteners
11. Cjames570 - one set (both seats)
12. buddha - one set (both seats) + extra fasteners
13. seattime - one set (both seats)
14. 528elover - TWO sets (FOUR seats)
15. (528elover's second set)
16. swaggery - one set (both seats)
17. cro51 - one set (both seats)
18. jc72 - one set (both seats)
19. afeustel - one set (both seats)
20. JEDCO - one and a HALF sets (THREE seats)

This is for US bound orders. If an order is to be shipped to Canada, then please contact me as taxes will have to be charged.

- $120.00cad for a full set of adapters to fit two seats. Shipping by US Postal w/ tracking to the US is $25.00cad - Total $145.00cad
- $180.00cad for 1.5 sets of adapters as per Jedco request. $28.00cad shipping - Total $208.00cad
- $240.00cad for a two sets of adapters. Shipping is $28.00cad - Total $268.00cad

Fasteners are included. Please add in the Paypal note your fasteners requirement (as well as your forum nickname to help the process).

Per seat:
Four 8mm bolts OR Six 6mm bolts, depending on your seat mount pattern (either 4x8mm, 6x6mm, or the less common 4x6mm).
Examples of each pattern can be seen HERE: http://www.mye28.com/viewtopic.php?f=4& ... 5#p1395238
(additional needed hardware for mounting adapters to E28 bases is included with all sets!)

I am using high grade cylinder head cap screws. Not cheap. So if you want BOTH kinds of hardware (6mm and 8mm) add $10.00cad extra for both seats ($5.00cad per seat) and put a note in the Paypal payment.

ETA is two weeks for production.

I welcome Paypal in Canadian currency only at massivebrakes@gmail.com

If you're not familiar with paying with a different currency, here's how it works. Very simple.
https://www.paypal.com/us/cgi-bin/websc ... nd-outside

So, please consider the GB closed.
Thanks all.

Lee

ORIGINAL POST BELOW:

While looking for a solution to mount my Recaro seats in my E28, I contacted Lee at Massive who makes the popular E30 sport seat adapters for our stock rails. He said that he no longer offers the Recaro adapters as sales volume was too low, but would make up another batch if we could get a group buy together. Would anyone be interested in a set of these? They are substantially less expensive than the alternative (Wedge brackets and sliders at $400 for both sides). Please reply if you would be interested in a set, quoted below is more info and pricing from the last batch. I imagine pricing would be similar for this batch. We need to have 10 cars (or 20 SEATS) worth to make this happen. For the purposes of this group buy, one "set" is two seats' worth of adapters.

Lee wrote:I have been offering adapters for Recaro reclinable seats on OEM BMW sliders for 2002s and e30 chassis for a while. This time, I have some for e28s. This prototype batch is made from sturdy 1/4" aluminum and is compatible with several bolt patterns found on Recaro L-Series, SRD, Speed, Porsche Trophy, VW Trophy etc.

6 x 6mm -- 4 x 6mm -- 4 x 8mm

406mm distance side-to-side / 261mm front-to-rear

All graded and zinc plated fasteners are included.

$60.00usd for one seat + $22.00usd shipping
$110.00usd for two seats + $25.00usd shipping

Paypal is massivebrakes[at]gmail.com

Don't hesitate to ask questions. Thanks.

Lee

I'd be in for both seats

I'm in for both seats.

+1 for both seats thanks

In for two.

Halfway there!

Both seats

In for both seats!

I'd be in for two

OK I'll bite... give me both seats please!

One more to go! Since it looks like this is happening, I followed up with Lee and he had this to say:

Hi Desmond

I will check tomorrow for a timeframe. Most likely two weeks.

Instead of a thick 1/4" alu plate, I might go for 3/16". I will look at prices too and will most likely update the design to fit all Recaro seats

Lee

I'm in for a pair of seats

Woohoo, we made it! When Lee follows up tomorrow with further details I will post them here and begin sending out PMs with next steps.

I need to get on this..... too late?

I'd like a set, too.

UPDATES: after discussion with Lee it has been decided that the group buy will remain open until Tuesday at midnight, giving him time to finalize the new design and queue production. The good news is that he says these will be cheaper than the last batch and should be shipped within a two week timeframe! We just won't know how much cheaper until early next week. Once we have final pricing I will reach out to everybody via PM to solicit payment. Thank you all again for helping to get a new run of these made!

HI Desmond

Leave a few more days if you want. Today is very busy for me and I don't even have time to enquire about ETA or final pricing. But I'll make sure the parts will done and shipped within two seeks and I will even offer a better price than what was posted.

Thanks for your help.

Lee

I'd like a set.

I'm in for FOUR seats.

In for a pair

In for a pair too!

Latest update:

​Hi Desmond

I shall have prices tomorrow.

The adapters will fit all Recaro bolt patterns. The older patterns w/ Ø6mm x 6 and Ø8mm x 4 bolts as well as the newer one with 297mm mounting distance w/ Ø8mm x 4 bolts.

Aluminum adapters will be shipped beadblasted. People can spray them the colour of their choice or "brush" them with a pad.

I am making 20 sets (20 cars). A better price will be offered on this GB, and what ever is left will be at a higher regular price. Last production was 4 years ago. So whatever is made on this production is what will be available for thext 4 years

Individual shipping will be around $25.00cad per set.

Lee

these are for only manual bases correct?

BDKawey wrote:these are for only manual bases correct?

That is my personal understanding. I've never had an E28 with power seats so I can't verify, but perhaps someone who does can confirm?

I would like a set if it is not too late (2 seats).

Thanks
Drew

SlickDizzy wrote:

BDKawey wrote:these are for only manual bases correct?

That is my personal understanding. I've never had an E28 with power seats so I can't verify, but perhaps someone who does can confirm?

I was unaware about how common manual seats are then haha. i didnt think many people had them at all. both of my e28s were power

Hi everyone

It's been a very long time since I came here. First, thanks for participating to this GB. I am surprised we reached (almost) 20 interested parties, and am glad we did. Production shall start in the coming days after I have established the GB price. The five years old price was $110.00usd for a complete set which is $145.00cad at current exchange rate. I am aiming (I will confirm by the end of the day) at a price of $120.00cad which is roughly $90.00usd for two seats.

I have redrafted the e28 adapters to have the exact same seat mounting pattern as the e30 Recaro adapters which I have sold over 400 sets and has become a standard when fitting a Recaro seat on OEM e30 sliders.



The e28 aluminum adapters will fit all factory Recaro seats on e28 bases. L series Recaros, Speed, SRD, and newer ones too. But please take note that some Recaro seats made specifically for a car manufacturer's base system might not work as it may have a different bolt pattern. Sometimes they may even have welded brackets on them.

Exemple of Recaro bolt patterns. Please check with your own seats.

Six 6mm bolts







Four 8mm bolts (VW Trophy seats also are four bolts)

I'm in for 3 seats. 1.5 sets please

JEDCO wrote:I'm in for 3 seats. 1.5 sets please

There is only one set left available unfortunately. Is that adequate?

Yes

Hi Jedco

Thanks for participating in this GB

If we reach 20 pairs (which I believe we did), and you need an extra set for a single seat, then I am willing to produce two more pieces for that extra seat. But otherwise, I don't want start splitting sets and end up with left overs. So basically, if somebody asks me half a set for only one seat, then I will reply it is not part of the offer.

So, in short, Jedco. It's okay.

Lee

-- Added 18 Oct 2016 17:40 --

PRICE CONFIRMATION

I confirm the price. These are for US bound orders. If an order is to be shipped to Canada, then please contact me as taxes will have to be charged.

$120.00cad for a full set of adapters to fit two seats. Shipping by US Postal w/ tracking to the US is $25.00cad - Total $145.00cad
$180.00cad for 1.5 sets of adapters as per Jedco request. $28.00cad shipping - Total $208.00cad
$240.00cad for a two sets of adapters. Shipping is $28.00cad - Total $268.00cad

ETA is two weeks for production.

I welcome Paypal in Canadian currency only at massivebrakes@gmail.com

If you're not familiar with paying with a different currency, here's how it works. Very simple.
https://www.paypal.com/us/cgi-bin/websc ... nd-outside

Fasteners are included. Please add in the Paypal note your fasteners requirement (as well as your forum nickname to help the process).

Per seat
Four 8mm bolts
Six 6mm bolts

So, please consider the GB closed.
Thanks all.

Lee