MyE28.com

I want to keep the stock b35 fuel rail but need to remote mount the fpr. A few times I've seen a block off plate that places a nipple in the stock fpr location. This allows a hose to be ran a separate fpr. Does anyone know a vendor that sells this type of plate? Pretty old stuff and maybe hard to find.

I got one from Ireland Eng years ago.

George wrote:I got one from Ireland Eng years ago.

Good call! Will ping them.

If you can't find anything LMK.

There is a nice looking one currently FS on the FB E28 Group page.

Kyle in NO wrote:There is a nice looking one currently FS on the FB E28 Group page.

BOOM!!!!

Why wouldn't you just use a BELL ENGINERRING fuel pressure regulator which just ties into the return line of your stock regulator. I think the regulators can be bought now at gmax performance.

5timesturbo wrote:Why wouldn't you just use a BELL ENGINERRING fuel pressure regulator which just ties into the return line of your stock regulator. I think the regulators can be bought now at gmax performance.

I can't run the stock fpr (mounted in the forward position) under the e12 intake due to clearance issues. Plan was to remote mount an aftermarket regulator. This should work no?

Motornic 1.0 Non-Adaptive Parts by samleisey, on Flickr

This is a regulator and rail on a 011 Ecu 1982 635csi, this could easily be made into a remote mount regulator?

looks good