E28 M5 Brake upgrade
Posted: Jul 07, 2022 4:19 PM
So after reading for a year and a half, and having my discs warped twice in one year and re skimmed I have decided on the following upgrade.... But there are problems
Front
E31 (US model, after 8/93)
Roters 324mm x 30mm thick rotors.
Caliper Part #: 34 11 1 161 177/178, non available second hand, so will be new at 500 euros each
Rotors Part #: 34 11 1 161 086 (superseded by 34 11 6 756 087)
No Carriers necessary as I understand it and its just a plug and play.
Rear
E34 vented (US model 540i/M5/540i Sport)
The calipers are single piston. To be used with 300mm diameter x 20mm thick vented rotors
Caliper Part #: 34 21 1 159 657/658 (superseded by 34 21 1 160 399/400), IM possible to find reasonably, but ffound some ATE ones...
Rotor Part #: 34 21 1 165 265
Carrier Part #: 34 21 1 160 384 ( these are difficult to find but BMW sells them at 400 euro EACH...
? Goodeidge b rake line, or similar,
Pads, ECB?
I am going to try to set this up if I find the calibers, and then see how it all works, will I need a 750 master cylinder..
So far I have only been able to find the rear calipers, the carriers are far too expensive and looks like I WILL BE GOING TO THE DEALER FOR THE FRONT CALIPERS.
Any one who has any of these for sale I would be grateful, and any ideas or anything I have missed out on would also be appreciated.
Thanks
Front
E31 (US model, after 8/93)
Roters 324mm x 30mm thick rotors.
Caliper Part #: 34 11 1 161 177/178, non available second hand, so will be new at 500 euros each
Rotors Part #: 34 11 1 161 086 (superseded by 34 11 6 756 087)
No Carriers necessary as I understand it and its just a plug and play.
Rear
E34 vented (US model 540i/M5/540i Sport)
The calipers are single piston. To be used with 300mm diameter x 20mm thick vented rotors
Caliper Part #: 34 21 1 159 657/658 (superseded by 34 21 1 160 399/400), IM possible to find reasonably, but ffound some ATE ones...
Rotor Part #: 34 21 1 165 265
Carrier Part #: 34 21 1 160 384 ( these are difficult to find but BMW sells them at 400 euro EACH...
? Goodeidge b rake line, or similar,
Pads, ECB?
I am going to try to set this up if I find the calibers, and then see how it all works, will I need a 750 master cylinder..
So far I have only been able to find the rear calipers, the carriers are far too expensive and looks like I WILL BE GOING TO THE DEALER FOR THE FRONT CALIPERS.
Any one who has any of these for sale I would be grateful, and any ideas or anything I have missed out on would also be appreciated.
Thanks