I think I'll go stick an M5 badge on my 535i. Then I'll have an M5, right?
~_~
1st post. wooohoooo. But I don't have a M535i/M5.......
-
- Posts: 2917
- Joined: Feb 12, 2006 12:00 PM
- Location: Spring Hill, TN
-
- Posts: 535
- Joined: Feb 12, 2006 12:00 PM
-
- Posts: 1558
- Joined: Feb 12, 2006 12:00 PM
- Location: UK
-
- Posts: 31
- Joined: Feb 12, 2006 12:00 PM
is there an M on the back of the m535i's? i have recently bought an m535i but all of the badges have been stripped ...if the m535i doesn't come with an m on the rear would it be poser to one. does anyone have a picture? ...i really can't find anything about the car, then again i haven't looked too hard
-
- Posts: 1558
- Joined: Feb 12, 2006 12:00 PM
- Location: UK
[QUOTE="Cacatfish"]Veloce, what does your E12 consist of?
Colin[/QUOTE]
It's a 1975 530i. Has a balanced 3.5 with 10:1 pistons, Schrick 282, Motronic injection with chipped ECU, e28 Radiator, Euro e34 exhaust manifolds with 635CSi down pipes, MM System 300 exhaust, G265, MM short shift, Sachs sport clutch, 40% LSD 3.64, Alpina springs and Alpina-valved Bilsteins, custom front strut tower brace, TEP rear tower brace, 3.0CS vented front brakes, SS brakelines, chunky Motorwerks front and adj. rear sways, urethane swaybar bushings and endlinks, urethane rear swingarm bushings, Grunts front control arm bushings. Also a custom leather (Duke!) interior with Recaros, Momo leather wheel, euro bumpers front and rear, BBS front spoiler, Kamei rear spoiler and 7.5x16" 840i wheels with 225/50-16 Bridgestones.
I'm building another engine for a TCD turbo, hoping to have that done and in summer of 2006.
Colin[/QUOTE]
It's a 1975 530i. Has a balanced 3.5 with 10:1 pistons, Schrick 282, Motronic injection with chipped ECU, e28 Radiator, Euro e34 exhaust manifolds with 635CSi down pipes, MM System 300 exhaust, G265, MM short shift, Sachs sport clutch, 40% LSD 3.64, Alpina springs and Alpina-valved Bilsteins, custom front strut tower brace, TEP rear tower brace, 3.0CS vented front brakes, SS brakelines, chunky Motorwerks front and adj. rear sways, urethane swaybar bushings and endlinks, urethane rear swingarm bushings, Grunts front control arm bushings. Also a custom leather (Duke!) interior with Recaros, Momo leather wheel, euro bumpers front and rear, BBS front spoiler, Kamei rear spoiler and 7.5x16" 840i wheels with 225/50-16 Bridgestones.
I'm building another engine for a TCD turbo, hoping to have that done and in summer of 2006.