Page 1 of 1

Posted: Aug 05, 2005 9:44 PM
by unslow
I posted this as part of a seperate post (see my instrument cluster post in Tech) but I'm afraid it might get buried so I'm reposting it here. Sorry if this is considered spam.

To make a long story short, I pulled my instrument cluster tonight. In doing so, I noticed that in the row of idiot lights, there is a spot for "Check Engine". In my car, there is no bulb behind it, just an empty hole. While I had everything out, I found an empty bulb socket that was mysteriously taped up in the rest of the loom. Possible attempt to get around an annual inspection???

I *think* I read somewhere that not all e28s (or maybe just not the M5?) had check engine lights but I could be wrong.

So my question is, does anyone know for sure if there is supposed to be a check engine light present?

Thanks-

Posted: Aug 05, 2005 9:47 PM
by unslow
I think I answered my own question. Checked the owner's manual and it makes no mention of the Check Engine light so I'm assuming I don't need to worry about it. Interesting that the factory appears to have everything in place for it but never bothered to use it. And since the M5 was towards the end of e28 production, you'd think that that model would have it if they intended to use it on the e28.

If anybody knows otherwise, please let me know.

Thanks.

Posted: Aug 08, 2005 11:26 AM
by Matt
The M5 used motronic 1.0. I'm guessing check-engine only showed on Mot 1.3 cars, which would be sufficiently late 528e's, possibly the 535 ?

Posted: Aug 09, 2005 1:20 AM
by Kenny Blankenship
It does not have a check engine light. But as the California BAR (smog nazis) and they say it does. How do I know that? Because I tried to get a BAR sticker for the M7 and they wouldn't give it to me because of it. Their reference are incorrect, but CA BAR wont bend.

Posted: Aug 09, 2005 3:35 PM
by scottiesharpe
CA bar also has incorrect timing references for the M106.

When I get my car smogged, I bring the factory manual.

Tell the tech to get Sacremento on the phone; you will fax the factory reference pages in German.

They will bend!!!

Posted: Aug 09, 2005 4:05 PM
by Kenny Blankenship
He already talked to Sacto...