MyE28.com

I have an in car video but need to buy a cable to get it into the computer.






This is the video with the digital camera from outside. The good video was recorded inside the car. I hope to have it up tomorrow.

http://video.google.com/videoplay?docid ... testing%22

[Edit by TCD on [TIME]1132637659[/TIME]]


[Edit by TCD on [TIME]1132637745[/TIME]]

haha nicely done

what's the lockup on your diff?

[QUOTE="bahnstormer"]haha nicely done

what's the lockup on your diff? [/QUOTE]

Stock 25% 3.73 from a euro M635csi

hahahahahhahahahhahhahahahahahhah ~0

Don't forget folks, this was done with a motor that is way past its expiration date.

5 cyls. right, Todd?

[QUOTE="Bill in MN"]Don't forget folks, this was done with a motor that is way past its expiration date.

5 cyls. right, Todd?[/QUOTE]

Yep. Wait until you hear the rings rattling around in the movie.

Todd,
Arent you worried at all about WMDing your engine and throwing some crap into the turbo?

turbos are replacable, burnouts like that one are priceless

the chunks-o-motor would also have to get thru the pick up screen, the pump, and the filter. so its pretty safe destruction.

[QUOTE="Duke M535Ti"]Todd,
Arent you worried at all about WMDing your engine and throwing some crap into the turbo?[/QUOTE]



[Edit by chrism on [TIME]1132542010[/TIME]]

get the friggen cable dude.........................

[QUOTE="chrism"]the chunks-o-motor would also have to get thru the pick up screen, the pump, and the filter. so its pretty safe destruction.[/QUOTE]

I was thinking about the chunks of valve/head that would pass thru the exhaust ports an into the turbo.

[QUOTE="Duke M535Ti"]Todd,
Arent you worried at all about WMDing your engine and throwing some crap into the turbo?[/QUOTE]

The pieces of rings and ring land would have a difficult time entering the combustion chamber. I am done playing now. Car is going back in storage. Building a proper motor this winter.

Todd

Man that looks like fun....

How is the 3 doing?

[QUOTE="TCD"]Building a proper motor this winter.

Todd[/QUOTE]

Would that be a M106 with lots of ceramic coating hear and there? Hopfully you will not have a engine noise like I do once complete.

[QUOTE="bahnstormer"]haha nicely done

what's the lockup on your diff? [/QUOTE]

[QUOTE="TCD"]Stock 25% 3.73 from a euro M635csi[/QUOTE]

Todd, you once wrote 3.73's were for low HP cars! But after seeing this, I might just as well get that gearing ratio for my turbo 535i!


[Edit by Monotalonawd on [TIME]1132634034[/TIME]]

[QUOTE="TCD"]I have an in car video but need to buy a cable to get it into the computer.



[/QUOTE]

Great pics Todd!!!!!!!!!!!! Is this the 535il version or is the rear end having trouble keeping up w/ the front end????????

[QUOTE="Monotalonawd"]Todd, you once wrote 3.73's were for low HP cars! But after seeing this, I might just as well get that gearing ratio for my turbo 535i!

[Edit by Monotalonawd on [TIME]1132634034[/TIME]][/QUOTE]

This car is an automatic. 3.73 is too much for a 5 speed car.


[Edit by TCD on [TIME]1132634888[/TIME]]

[QUOTE="Duke M535Ti"]Would that be a M106 with lots of ceramic coating hear and there? Hopfully you will not have a engine noise like I do once complete.
[/QUOTE]

Probably just a m30b34 bottom end with forged 8:1 pistons, MLS gasket, ARP studs and stock m30b35 cyl head.

Todd

so......is that an old school power brake burnout..? or did you just load the converter and firewall it..?

hehehehe...looks bitchen regardless........

[QUOTE="canyoncarver"]so......is that an old school power brake burnout..? or did you just load the converter and firewall it..?

hehehehe...looks bitchen regardless........ [/QUOTE]

I power braked it for a few seconds. You'll see in the video.

Todd

[QUOTE="Monotalonawd"]Todd, you once wrote 3.73's were for low HP cars! But after seeing this, I might just as well get that gearing ratio for my turbo 535i!

[Edit by Monotalonawd on [TIME]1132634034[/TIME]][/QUOTE]

one fo my buddies runs about 550 rwhp on his lower boost setting at the track with 3.91 gears. he ran it at that boost on the street and just when easing into the throttle on the highway in 3rd gear, he ripped the shit out of the tires.

this would make a good post over at StreetFire. I like.

RussC

[QUOTE="TCD"]I have an in car video but need to buy a cable to get it into the computer.






This is the video with the digital camera from outside. The good video was recorded inside the car. I hope to have it up tomorrow.

http://video.google.com/videoplay?docid ... testing%22

[Edit by TCD on [TIME]1132637659[/TIME]]

[Edit by TCD on [TIME]1132637745[/TIME]][/QUOTE]

anyone else not get sound?

[QUOTE="bahnstormer"]anyone else not get sound?[/QUOTE]

There is no sound. The in car video has sound and will be up soon.

Todd, looks like a repeat of Downtown Greenville :p ~0 Got no sound here either Randy/

Good Lord!........ theres just something about seeing an E28 with rear tires ablazing! Too sweet!

When i go back to school next month, ill take some pics of my "laying drag" ticket i got in my school parking lot. Cost me $800 in the end with a lawyer. I think I swung it around a good 4x and made very large distinct circles. Good old 535i /w a lsd.

I'm getting new snow tires by the end of this week - hopefully I can go find a deserted parkinglot or road and take some sweet burnout / doughnut shots

great post Todd. can't wait for the in-car vid with sound.

too nice

dont get arrested tj. i was close to it when I got mine but he decided just to ticket me.