MyE28.com

Heres the dyno chart...


As we said, that seems high for only 10psi, although I don't know the static compression

RussC


[Edit by russc on [TIME]1137784623[/TIME]]

Looks nice. Intercooled or not? I should probably search for the answer. Other specs?

i talked to jason right after this dyno. he said the intercooler was not hooked up properly i think so basically non-intercooled. he had a t61 and the MM cam so do you really think these numbers look high? i had a stock motor at my dyno and a 60-1 turbo and i made about 360 rwhp but i also had a standalone engine management and deleted the afm. i think todd was hoping for something higher at this boost level.

p.s. how is jason, havent heard anything on him in a long time.

Intercooler was in place but dry so it was essentially non intercooled. He had a stock m30b34 bottom end and a new MM head and "turbo" cam. Still running Motronics. I was pleased with the number. It's ~40hp higher than a regular m30b34 with the same setup. But, torque is abt the same!

In all reality it performed about the same as a stock m30b35 at the same boost level non intercooled.

Todd


[Edit by TCD on [TIME]1137868963[/TIME]]

this might be a stupid question, but what is an "MM cam" And where can you buy one/what do they go for?

[QUOTE="bmwmike"]this might be a stupid question, but what is an "MM cam" And where can you buy one/what do they go for?[/QUOTE]

MM = Metric Mechanic http://www.metricmechanic.com

Their online price lists the M30 "rally cam" as 280 degree duration at $495. ~0

Jeremy

[QUOTE="bmwmike"]this might be a stupid question, but what is an "MM cam" And where can you buy one/what do they go for?[/QUOTE]

Or buy an OEM 270 cam for $225.

Todd

for what its worth...........im using the MM rally camon a normally apirated motor. (11-1 comp) head started as an MM sport head and has had additional port matching, valve unshrouding, blending and flo bench time.
for an use on an NA motor, it offers gobs of torque and pulls strong to about 6500..it tapers off above that, but will pull thru 7200 rpm.
for this motor..i'll likely replace it with a straight 284 or 292 cam..........

but.........it should make a hella strong turbo cam.......................looking forward to trying in in an FI application

[QUOTE="TCD"]Intercooler was in place but dry so it was essentially non intercooled. He had a stock m30b34 bottom end and a new MM head and "turbo" cam. Still running Motronics. I was pleased with the number. It's ~40hp higher than a regular m30b34 with the same setup. But, torque is abt the same!

In all reality it performed about the same as a stock m30b35 at the same boost level non intercooled.

Todd

[Edit by TCD on [TIME]1137868963[/TIME]][/QUOTE]

Ya, but this system would pick up power with the IC properly working and some tuning to the ECU. Id say it could pick up 25whp easy with those 2 things at 10psi. Thats pretty stout at that point. Plus, we know that the mid torque is hurt by the cam, and the system should pick up more top end with above items fixed.

Plus, theres always the dyno differences, which can be large, probably +5% to -10% easy on any given day or dyno.

RussC

Ok, I am back the cam that I have is a 292, MM now makes their heads with a 288

Hey "bmw335ist. I just picked up a 86 535i with M30.... Im going to boost around 7 psi.. I know I can use stock computer. Should I port and polish the head? When I do a rebuild on the engine is there any choice of pistons or cams that are relatively cheap... your MM 289 sounds good. Roughly how much did your turbo setup (without the intercooler) cost you?

[QUOTE="jimbixjr"]Hey "bmw335ist. I just picked up a 86 535i with M30.... Im going to boost around 7 psi.. I know I can use stock computer. Should I port and polish the head? When I do a rebuild on the engine is there any choice of pistons or cams that are relatively cheap... your MM 289 sounds good. Roughly how much did your turbo setup (without the intercooler) cost you? [/QUOTE]

most of those questions have been answered on this board many times - try the search feature.

most of those questions have been answered on this board many times - try the search feature.

it would be easier if he could just tell me "roughly" how much his setup cost and you not talk at all. Thanks

by this time you could have searched, found your answers, and not come across as a total squish mitten - good job.


[Edit by Tjn182 on [TIME]1138125058[/TIME]]

Well thanks for your help guys, I came here with some knowledge and now I feel even stupider but hey, I got called a squish mitten??? Im not trying to be a total ass I just wanted an answer and you had to be bossy kinda tough jerk guy and tell me to look and I did and I definetly didn't see anywhere the guy stated how much his turbo set up cost. Thanks a bunch...I guess. peace all, im done

I wont interact anymore ill just read

[QUOTE="jimbixjr"]I wont interact anymore ill just read[/QUOTE]

Man no need for that...

You'll find a lot of useful information ...just try the search button and you'll probably find about 90% of your questions were already posted...

No worries.....

welcome to the club. post away, but most stuff (especially in the FI section) has been covered or at least talked about in some form or another. Us turbo guys have seen our fair share of ssome turbo systems and most know their stuff, its just the constant repitition of peopole asking little things that can get to the best of us. Post up, get a reply, and if you solved your problem, delete the post and everyone is happy. If you have any questions on anything, start and introduction post about yourself, your car, everything we should now about your car to help your situation, and what you want known. Then we have everything we know to help you and we can do so without these stupid arguing posts.

jimbixjr wrote:Well thanks for your help guys, I came here with some knowledge and now I feel even stupider but hey, I got called a squish mitten??? Im not trying to be a total ass I just wanted an answer and you had to be bossy kinda tough jerk guy and tell me to look and I did and I definetly didn't see anywhere the guy stated how much his turbo set up cost. Thanks a bunch...I guess. peace all, im done

No - All I said was

most of those questions have been answered on this board many times - try the search feature.

Nowhere in there is any signs of me being angery, insulting, or bossy. I was stating a fact that your answers can be found using the search feature - Yet you turn around and tell me to shut up like you own the god damn place... I don't have the problem here....

[Edit by Tjn182 on [TIME]1138133912[/TIME]]

I believe he used a TCD system. One of those will run you about $4-$5k depending on exactly what you want. www.turbochargingdynamics.com will answer your pricing questions, the archives should answer any others.

Jeremy

All I have to say www.turbochargingdynamics.

Talk to todd He will get you a kit that will fit your applation.
O ya and Russ C check this out

thanks for the bigger pic. Its in my archive again.

RussC

Looks like Todd lost his account :P