MyE28.com

Hey guys,

I'm piecing together a DIY turbo build for my e28 and I'm wondering where is the best place to get an oil feed from on the m30? Also what pieces do I need?


Edit: Also some pictures would be nice of some of your oil feed setups.


Thanks,
Jess

With the TCD kits, you tap right into the oil filter block. Quick and easy.

this I know what I wanted to know is sizing of the hardware and maybe part numbers,

thanks,
Jess

Part# for the drill bit or the tap?

Jimmie

ok so where do I drill and tap exactly?
Reason I thought there would be part numbers involved is on my e30 I used some hardware to T-off the stock oil sensor to feed the turbo. I was assuming there was something similar on the m30. Anyone have any pictures of this oil feed setup?


Also would TCD sell just the oil feed lines and fittings?

Flip_Side_the_Pint wrote:

Also would TCD sell just the oil feed lines and fittings?

Why don't you call and ask?

Mark 88/M5 Houston wrote:Flip_Side_the_Pint wrote:

Also would TCD sell just the oil feed lines and fittings?

Why don't you call and ask?

I would say yes based on my experiences/dealings with them. Just because they sell a full kit doesn't mean they won't help you with parts for yours.

As Mark said give them a call.

Flip_Side_the_Pint wrote:ok so where do I drill and tap exactly?

http://home.mindspring.com/~scrappycrow ... nders.html

Shawn D. wrote:

Flip_Side_the_Pint wrote:ok so where do I drill and tap exactly?

http://home.mindspring.com/~scrappycrow ... nders.html

thats just what I needed...

Thanks Shawn D.


And it looks like I don't need anything. Everything I need was left over from my e30 or I already had it in my garage....