Page 1 of 1
MS guys - Which TPS for m20 TB?
Posted: Aug 01, 2007 7:22 PM
by Pat
This isnt for my e28, but im MSing my e21 and i have an m20 throttle body for it. Which is the easiest TPS to use, e34 525i m20? E36 m50?
Posted: Aug 01, 2007 9:26 PM
by turbodan
The e36 M50 works with a simple adaptor plate, and plugs right into the stock harness. Thats what I chose.
Posted: Aug 02, 2007 3:34 AM
by altus22
A Kia or Hyundai TPS is also the pot type that you need. Again, simple adapter plate to make it work.
Posted: Aug 02, 2007 8:47 AM
by Pat
OK, so you gotta use an adaptor either way. And my car doesnt have a harness, its CIS right now so ill just make the wiring anyway. Thanks
Posted: Aug 02, 2007 2:22 PM
by turbodan
I see. I should have said it plugs right into the Motronic harness.
Posted: Aug 02, 2007 10:14 PM
by ///ARINUTS...
e32 and e34 automatic m30 cars have the perfect TPS, bolts right onto the throttle body
Posted: Aug 03, 2007 9:26 PM
by Pat
Bolts right up to an M20 throttle body? Perfect thats exactly what i was lookin for. I could use an adaptor but id really like a nice clean installation.
Posted: Aug 03, 2007 10:50 PM
by bmw4aaron
Pat wrote:Bolts right up to an M20 throttle body? Perfect thats exactly what i was lookin for. I could use an adaptor but id really like a nice clean installation.
Are you putting MS on a 323i? I just finished doing this. Used an m50 tps, with adapter plate, once tb is installed you cant even see the tps.
Posted: Aug 05, 2007 11:30 AM
by Pat
No, the MS is goin on a 320i with an M10, but i am using an M20 throttle body