Page 1 of 1
***SOLD**** B35 head with new cam, rockers and shafts
Posted: May 17, 2011 8:38 AM
by alpinacsi
I bought this head from Todd at TCD about a month ago and have since found another option for my project. This is a fresh head with 0 miles and is still packaged as I received it from TCD. $500 shipped to the lower 48. I can also deliver to Vintage.
Here is a link to his original listing:
http://www.mye28.com/viewtopic.php?p=83 ... ht=#832718
Posted: May 17, 2011 8:58 AM
by JoshInAtlanta
Nice! Do you have a spare B35?
Posted: May 17, 2011 9:42 AM
by alpinacsi
JoshInAtlanta wrote:Nice! Do you have a spare B35?
The complete b35 is going into an e30.
Posted: May 17, 2011 11:46 PM
by DJM1986-5
Todd,
I have to get down and see the E30 project one of these weekends. I take it you finally found the white E30 you were looking for...see you at the Vintage
DJM
Posted: May 19, 2011 8:25 AM
by alpinacsi
Finally found the right e30: alpineweiss with blue cloth. It is a US model that was purchased and used in Germany for a few months prior to transport here. Now I need to get busy.
Posted: May 24, 2011 8:45 AM
by alpinacsi
still available
Posted: May 25, 2011 8:39 PM
by alpinacsi
Can deliver to Vintage
Posted: May 26, 2011 5:16 PM
by Mr.ProjectCar535
Damn...I just dropped 630 to get my b34 head rebuilt
I should have looked on here first....
GLWS
Posted: May 28, 2011 11:42 AM
by bovilexic
pm sent...
Posted: Jun 16, 2011 1:23 PM
by alpinacsi
Still available.
Posted: Jun 16, 2011 2:09 PM
by gmb49all
Got pics?
Posted: Jun 16, 2011 2:32 PM
by alpinacsi
gmb49all wrote:Got pics?
No; I do not. But I did provide the link to the original ad as was posted by TCD which did include pics. As I mentioned, it is still boxed as received from TCD.
Posted: Jun 16, 2011 5:21 PM
by gmb49all
This is probably a dumb question that I'm going to get reamed for, but is this just an ordinary head, or did they setup for a turbo application? Not that I know what they would do differently, but since I'm the only one expressing interest so far, figured I'd ask.
Posted: Jun 16, 2011 5:32 PM
by alpinacsi
It is basically a stock head for the m30b35 that was rebuilt with new components. The cam is a desirable factory cam and the head is suitable for turbo use. If you use this on a stock m30b34, you will lower your compression (possible benefit for turbo) gain better cam, have larger valves but you might want to use the b35 manifolds as well.
Posted: Jul 01, 2011 3:08 PM
by alpinacsi
still available
Posted: Aug 02, 2011 3:51 PM
by alpinacsi
still available
Posted: Aug 18, 2011 10:22 AM
by alpinacsi
bump