M30 turbo manifolds GROUP BUY ENDED

90e34535i · Post by **90e34535i** » Nov 01, 2013 10:42 AM

Is it too late to send a deposit to secure one? Don't know how I missed this thread.

Good & Tight · Post by **Good & Tight** » Nov 01, 2013 11:52 AM

90e34535i wrote:Is it too late to send a deposit to secure one? Don't know how I missed this thread.

Not to late, have a few left.

bIGjake · Post by **bIGjake** » Nov 15, 2013 11:48 PM

Any of rhese left?

Good & Tight · Post by **Good & Tight** » Nov 16, 2013 7:28 AM

bIGjake wrote:Any of rhese left?

Yes I ordered a few extra.

Manifolds have been completed. They are in the process of being packaged for shipment to the USA. Shipping time takes roughly 3-4 weeks then a few days for customs clearance.
__________________

gazm3 · Post by **gazm3** » Nov 16, 2013 5:14 PM

Hey there Otis. These manifolds look great for the price. Aside from dump pipe routing is there any issue with using your manifold for RHD application. Also I assume they will fit any m30. A few of us down under have e24's that we are upgrading.

Good & Tight · Post by **Good & Tight** » Nov 16, 2013 5:32 PM

gazm3 wrote:Hey there Otis. These manifolds look great for the price. Aside from dump pipe routing is there any issue with using your manifold for RHD application. Also I assume they will fit any m30. A few of us down under have e24's that we are upgrading.

They will fit RHD, I have made a few for kangaroo land.
Thanks

jodystevens · Post by **jodystevens** » Nov 16, 2013 7:17 PM

Fit e12 anyone know?

Good & Tight · Post by **Good & Tight** » Nov 17, 2013 7:25 AM

jodystevens wrote:Fit e12 anyone know?

I don't see why not, it will fit in a E30 and E28, don't know if the E12 has a smaller engine compartment.
You could always return it if it doesn't fit.

gazm3 · Post by **gazm3** » Nov 17, 2013 7:35 AM

Good & Tight wrote:
gazm3 wrote:Hey there Otis. These manifolds look great for the price. Aside from dump pipe routing is there any issue with using your manifold for RHD application. Also I assume they will fit any m30. A few of us down under have e24's that we are upgrading.
They will fit RHD, I have made a few for kangaroo land.
Thanks

Cheers
Was going to build a hot rod NA s38 for new race e28. Perhaps to fast track throwing a snail on the low comp m30 may be a good interim measure. I'll also ask a few of the local boys whether they looking at some m30 boosting.

visionshift · Post by **visionshift** » Nov 17, 2013 12:58 PM

Is it too late to hop on this offer? how much is it total for a manifold for an M30 in an E28?

dr.house · Post by **dr.house** » Nov 19, 2013 4:10 PM

I want one ass swell if its possible?

Good & Tight · Post by **Good & Tight** » Nov 20, 2013 5:59 AM

I updated the arrival date and ship time on the first post.

There are a few manifolds left so if you want one, go ahead and send your deposit. paypal info is on the first page. They are $600 shipped within the USA. I will ship worldwide for an additional cost.

visionshift · Post by **visionshift** » Nov 21, 2013 9:15 AM

Gunna have to scrounge up some cash!

visionshift · Post by **visionshift** » Nov 25, 2013 11:37 AM

Ight, save a set for me. I'll be sending my $300 in the next week!

Hffvdbl · Post by **Hffvdbl** » Dec 03, 2013 12:23 PM

Deposit sent!

JesterMX6 · Post by **JesterMX6** » Dec 04, 2013 8:10 AM

final payment sent.

let me know if you need me to PM you my shipping address.

Thanks!

tranmkp · Post by **tranmkp** » Dec 12, 2013 3:29 PM

I'll get one in a second if it fits

Post by **mooseheadm5** » Dec 12, 2013 3:31 PM

There is more room in a 745 than there is in an E28, so it really should fit without issue.

Good & Tight · Post by **Good & Tight** » Dec 24, 2013 2:14 PM

Manifolds have arrived and are in customs.
What a Christmas gift..!!!

Cjames570 · Post by **Cjames570** » Dec 25, 2013 1:46 PM

Sweet! I will send the final payment soon!

jodystevens · Post by **jodystevens** » Dec 25, 2013 3:22 PM

tcturbo91 · Post by **tcturbo91** » Dec 26, 2013 11:04 AM

final payment sent.

TheGraye28 · Post by **TheGraye28** » Dec 27, 2013 11:22 AM

Final payment sent. Excited to see the final product!

Good & Tight · Post by **Good & Tight** » Dec 27, 2013 2:26 PM

Thanks guys. Manifolds have cleared customs and are heading towards the warehouse.

Picking them up next week...

love this dancing banana... lol...!!!

Cjames570 · Post by **Cjames570** » Dec 29, 2013 12:53 PM

final payment sent! how do you want our shipping address? will you just go by our paypal?

Good & Tight · Post by **Good & Tight** » Dec 29, 2013 1:02 PM

Cjames570 wrote:final payment sent! how do you want our shipping address? will you just go by our paypal?

Thanks Chris, I'm using paypal addresses, have a spread sheet with everyone on the list.

Cjames570 · Post by **Cjames570** » Dec 29, 2013 1:47 PM

hopefully my address matches between my first and last payments haha

im stoked!! one piece closer to being boosted!

Mrkanda · Post by **Mrkanda** » Dec 30, 2013 6:27 PM

I want one! But I am just getting my car on the 10th of Jan and won't have the cash for this manifold until probably Feb. Any chance there will be another run? BTW, it will be for a 1992 E34 535i 5-speed.
-Mark

Good & Tight · Post by **Good & Tight** » Jan 03, 2014 8:55 PM

Just wanted to give everyone an update.
Still waiting for release of the manifolds. They have cleared customs but they have not released them yet.
It's taking a little longer with emailing China and getting a response in a timely matter. Should have release docs finalized Monday and having them delivered to my home.

Good & Tight · Post by **Good & Tight** » Jan 07, 2014 11:56 AM

Just delivered fresh out of the box. They came out amazing.
I will start shipping them later today.

MyE28.com

MyE28.com

M30 turbo manifolds GROUP BUY ENDED

so will it fit my 745?